6 channel stepped attenuator

Ryssen · 2nd February 2008, 09:03 PM

Shunt,with dale resistors for 100K

390$ + shipping sounds fine..

Ryssen · 4th March 2008, 09:15 PM

350$+shipping...

Ryssen · 4th August 2008, 03:13 PM

340$+shipping...

Ryssen · 19th August 2008, 08:29 PM

340$+shipping...

Ryssen · 18th December 2008, 04:02 AM

300$+shipping...

badman · 18th December 2008, 04:16 AM

It looks like you've got 12 decks there, which would indicate a ladder configuration. Can you explain? That may be why you've not had more interest.

Ryssen · 18th December 2008, 04:41 AM

Hmmm,I bought it as a shunt.
It can be used as a balance one if removed some decks.

Ryssen · 18th December 2008, 05:55 AM

This is how its should work.

As there are 2 raws with resitors on every deck.
So if you remove 4 decks,it can be run i balance mode.

housing · 18th December 2008, 10:47 AM

Soldering a stepped ladder attenuator for a balanced amp is more difficult than soldering the amp itself, or at least as difficult.

How many steps does it have? What's its brand? Is it an Elma?

Can you list the values of the resistors also?

Ryssen · 18th December 2008, 01:09 PM

Quote:

Soldering a stepped ladder attenuator for a balanced amp is more difficult than soldering the amp itself,

Yes,I think so..

Quote:

How many steps does it have?

24 steps yes its a ELMA
I´ll have the sort the resistors first..

2nd February 2008, 09:03 PM	#1
Ryssen diyAudio Member Join Date: Dec 2003 Location: Sweden--> Here	6 channel stepped attenuator Shunt,with dale resistors for 100K 390$ + shipping sounds fine.. __________________ Regards Åke

4th March 2008, 09:15 PM	#2
Ryssen diyAudio Member Join Date: Dec 2003 Location: Sweden--> Here	350$+shipping... __________________ Regards Åke

4th August 2008, 03:13 PM	#3
Ryssen diyAudio Member Join Date: Dec 2003 Location: Sweden--> Here	340$+shipping... __________________ Regards Åke

19th August 2008, 08:29 PM	#4
Ryssen diyAudio Member Join Date: Dec 2003 Location: Sweden--> Here	340$+shipping... __________________ Regards Åke

18th December 2008, 04:02 AM	#5
Ryssen diyAudio Member Join Date: Dec 2003 Location: Sweden--> Here	300$+shipping... __________________ Regards Åke


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th December 2008, 04:16 AM	#6
badman diyAudio Member Join Date: Sep 2003 Location: Sunny Tustin, SoCal	Definitely shunt? It looks like you've got 12 decks there, which would indicate a ladder configuration. Can you explain? That may be why you've not had more interest. __________________ I write for www.enjoythemusic.com in the DIY section. You may find yourself getting a preview of a project in-progress. Be warned!

18th December 2008, 04:41 AM	#7
Ryssen diyAudio Member Join Date: Dec 2003 Location: Sweden--> Here	Hmmm,I bought it as a shunt. It can be used as a balance one if removed some decks. __________________ Regards Åke

18th December 2008, 05:55 AM	#8
Ryssen diyAudio Member Join Date: Dec 2003 Location: Sweden--> Here	This is how its should work. As there are 2 raws with resitors on every deck. So if you remove 4 decks,it can be run i balance mode. __________________ Regards Åke

18th December 2008, 10:47 AM	#9
housing diyAudio Member Join Date: Nov 2006	Soldering a stepped ladder attenuator for a balanced amp is more difficult than soldering the amp itself, or at least as difficult. How many steps does it have? What's its brand? Is it an Elma? Can you list the values of the resistors also?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
diy stepped attenuator under 10$	kaushik	Parts	23	12th January 2012 10:37 AM
4-Channel 10k Elma/Dact CT2 Stepped Attenuator	LastStop	Swap Meet	0	20th October 2005 08:41 PM
Stepped attenuator	Bas Horneman	Tubes / Valves	24	16th June 2004 07:18 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read