|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Swap Meet Sell your stuff here, who knows, some other fanatic might be interested! |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Oct 2002
Location: ...........
|
For UK people ONLY!!! Not sending gear overseas.
ALL drivers have been throughly tested and are 100% fully working. 2x Fane Studio 8M, 8 ohm versions, cast frame,vented pole piece, 100w rms, 80hz-8khz,SPL 101db at 1W/1m. £50 the pair o.v.n.o In very good condition. 2x Fane Studio 8M, 16 ohm versions, cast frame,vented pole piece,100w rms,80hz-8khz,SPL 101db at 1W/1m. £50 the pair o.v.n.o In very good condition. More info here: http://img176.imageshack.us/img176/4...tudio8mls4.jpg 2x Fane twin cone fullrange drivers, 12 inch, 16 ohms, 75w rms. Unsure of the model, as says nothing on there. Both cast frames though and large magnets. No vented pole piece, but dust cap is the cloth type. In good condition. They would suit guitar/keyboard combo cabs or fullrange hifi projects. £30 the pair o.n.o A pair of unloaded[ empty speaker cabs] that take a 12 inch driver and square piezo horn. Made of 18mm MDF and painted. Twin ported. Also have small metal bar handles and dual jack inputs and metal corners. In good condition. £35 the pair o.v.n.o 1x Selenium D205ti 1" Titanium Horn Driver In excellent working condition in it's original packaging. Only been tried out once for a project that had never happened due to running out of money. The D205TI is a cost effective high frequency compression driver utilizing a 1" throat, 40 micron thick titanium diaphragm, and 2" Kapton voice coil. High sensitivity, low distortion, and smooth frequency response are the hallmarks of this driver. Ferrofluid cooling reduces heat built up. Produces consistent results even with demanding usage. The front plate uses of standard 1" (25 mm) throat 2-bolt or 3-bolt on horn lenses. Power handling: 75 watts RMS/100 watts max Voice coil diameter: 2 inch Impedance: 8 ohms Frequency response: 800-18,000 Hz SPL: 108 dB 1W/1m Magnet weight: 34 oz. Dimensions: diameter: 5-5/16", depth: 2-3/8" * Net weight: 5-3/4 lbs. MUST BE USED WITH A CROSSOVER MINIMUM 800HZ. Will NOT refund money if someone is stupid enough to use it without a crossover of minimum 800hz. £25 o.v.n.o 2x High quality 2 way crossover 6khz, 12dB/18dB Slope, 8 Ohms. Screw box for input,HF and LF connections. * Type: Two Way Crossover * Frequency: 6KHz * Slope: 12dB/octave LF, 18db/octave HF * Impedance: 8 ohms * Long Term Power Handling: 250W RMS * Short Term Power Handling: 500W RMS * Dimensions: 118 x 105 x 38mm high * Insertion loss better than 0.4dB, Crossover point within +/-10% of stated value. A two way crossover seperates the low and high frequencies to LF and HF respectively. This results in better sound quality and is essential to protect the HF driver. £20 the pair, o.v.n.o Everything except the unloaded cabs can be posted. PM me for pics if seriouslly interested. NO time wasters. |
|
|
|
#2 |
|
diyAudio Member
Join Date: Mar 2007
|
I'd be happy to buy your Fane 8M /16 Ohm but I'm in USA.
Maybe you reconsider . I'm not in any hurry so you could have all the time you need to send them out. Regards, L |
|
|
|
#3 |
|
diyAudio Member
Join Date: Oct 2002
Location: ...........
|
Maybe but, shipping costs will be high.
If you pay shipping, not sure what it would be to usa, but I recon btw £30-£50. They would cost about £20 to send them in the UK as they weigh 8kg each driver + packaging. Also I'd only accept a money order[if UK banks take them] or a cheque, once cleared, I'd send them on. Thanks |
|
|
|
#4 |
|
diyAudio Member
Join Date: Oct 2002
Location: ...........
|
Postage would be £20 inc vat to send to USA by courier, just found out.And would need £10 for thick bubble wrap,strong tape etc. Otherwise they would get damaged in shipping.
+ will let the Fane Studio 8M's go for £40 min, the pair, 16 ohm versions. Total £70. If your willing to pay that. And still want them. Mail me to discuss payment,etc. Thanks |
|
|
|
#5 |
|
diyAudio Member
Join Date: Mar 2007
|
Great, Thank You
You've got mail Regards, L |
|
|
|
#6 |
|
diyAudio Member
Join Date: Oct 2002
Location: ...........
|
I can't find any mail from you.
|
|
|
|
#7 |
|
diyAudio Member
Join Date: Mar 2007
|
It's probably because I'm visiting and using my friends computer.
Shot me an email at <klamfil@earthlink.net > and we'll discuss the details. Regards, L |
|
|
|
#8 |
|
diyAudio Member
Join Date: Oct 2002
Location: ...........
|
2x Fane Studio 8M 16 ohm now SOLD to limono, thanks.
Also just SOLD the other 2x Fane Studio 8M 8 ohm ones to someone alse. Shame I can't edit my original post. Maybe a mod can kindly do that perhaps. |
|
|
|
#9 |
|
diyAudio Member
Join Date: Oct 2002
Location: ...........
|
2x Fane dual cone fullrange 12 inch drivers also SOLD now.
|
|
|
|
#10 |
|
diyAudio Member
Join Date: Jan 2008
|
please i am desperately searching for a good pair of fane studio 8m 8 inch 16 ohm.i will pay more than you ask.it is easy to ship via royal air mail.i will pay extra for any time rquired
|
|
![]() |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| For Sale: NHT Loudspeaker drivers and amps-Discussion Thread | Variac | Vendor's Bazaar | 429 | 14th June 2011 02:54 PM |
| For Sale: NHT Loudspeaker drivers and amplifiers | Variac | Vendor's Bazaar | 6 | 26th April 2009 02:48 AM |
| New To Site? | Need Help? |