FS: 40x2 VFD, 5.6" touchscreen, Inverters

[infrared]

5.6" LCD Touchscreen Overlay - $30 + shipping
Overlay that will go perfectly over the NTSC 5.6" LCD panels to make them touchscreen.. i don't have a controller, but I'm sure u can get one ebay for cheap.. I think its a 4 wire resistive.
1
2
3


LCD Backlight Inverters (65PWB31) - $10 shipped (or discount if larger quantity)
NEC Backlight inverter that has 2 outputs (good for those dual backlighted LCDs). I think it provides up to 1200volts so should be good for the bright LCDs.. Small compared to the other inverters I've seen, so thats a plus..
1
2
3


Noritake 40x2 VFDs (CU40026SCPB-T20A) - $30/$40 + shipping
I have 3 of these with all the relevant connectors included (IDC to hookup to VFD, and a parallel hood+port to hookup to computer, and the ribbon cable to go inbetween) so all you have to do is make the cable (pinouts are available). I have 1 that is prewired ready to go. Looking to get $30 for the bare ones and $40 for the prewired one.
1
2
3
4


Things I'd consider trading for:
- the 128x64 VFD on ebay (incase one of you got one but don't want it anymore)
- anything else you have that I might find interesting.. find me on aim, ATLien 1222.

Thanks
jason
stuffforsale@partyinthecity.com

 

[tiroth]

Interested in a 128x64 graphic LCD?
http://www.azdisplays.com/prod/g1264f.htm

Would be interested in a bare text VFD.

 

[infrared]

Interested in a 128x64 graphic LCD?
http://www.azdisplays.com/prod/g1264f.htm

Would be interested in a bare text VFD.

No thanks..

jason

 

[Hitman]

What controller do the VFD's use?

 

[infrared]

Hey..

I'm not sure but its not HD47780 or whatever the famous one is. However, it's very similar. I wrote some sample code you can get at http://partyinthecity.com/nts/nts.zip

Later,
jason

 

[Hitman]

Thats the controller I was hoping it used. I can only use an LCD with that particular controller with the software Im using.

 

[infrared]

oh okay.. well if you can get the source to that software it wont be hard at all to change (I think the command for clear and some other commands are the only thing diff)

jason

 

[infrared]

^^^

 

[Schaef]

Does this mean the VFDs are still available? If so, do you have some details on how to communicate with the devices?

 

[infrared]

Hello,

Yup, I have a couple VFDs still available. I'm not sure if I still have all the connectors (mainly the IDC ribbon cable connector, but this is commonly found at places like futurlec.com or allcorp.com). I still have the prewired one for sale also..

Jason