Toroids, amp modules, PSU's, amp case (UK)

[ShinOBIWAN]

Hi chaps,

I've swapped plans so the following is up for sale.

BTW Payment is either cheque, postal order, bank transfer or cash on collection please.

Unfinished mono block configured 4 channel GB300 project:

Consists of:

ATI Research 639-M Case

This is a real nice enclosure. Has capacity for amps upto stereo 100w class A or multi channel setup with class AB. I paid over £300 including shipping around a year ago.

Front plate: 482.60 w X 165.10 h (12-6mm thickness)
Internal size : 355.60 w X 162.56 h X 596.90 d (2 mm thickness)
6x Solid aluminum feet
2x large full length Heatsinks included (dimensions: 60cm x 16.5cm x 5cm)
4x LED indicators on front panel
Power switch on-off and knob included (Spun Aluminum)
All aluminum anodized
_____________________

4x SKA GB300D modules from Greg Ball

Includes full build instructions/schematic
Power is 300w into 8ohm
Cost me £280 for all four modules

Full details here: http://www.ska-audio.com/diy/003.html
_____________________

4x SKA GB300S PSU modules

Includes full build instructions/schematic
10x 4600uf 80v caps
Cost me £200 for all four PSU's

Full details here: http://www.ska-audio.com/diy/005.html
_____________________

4x 500VA 45-0-45v 240v Toroids

Around £120 worth of toroids.
_____________________

Plus a load pf quality connectors on the rear panel:

4x Neutrik RCA's
8x Chunky touch proof binding posts (might keep these myself though)
IEC inlet
Screw type fuse holder.

Some minor work needed to get it all working, two channels are already good to go, the other two GB300 modules need literally a few resistors soldering in place. And just the chassis grounds from the PSU's. That's it. A few hours work tops.

All in all there's nearly £1000 worth in this amp including all the connectors etc.

Asking a stupidly cheap £380. Don't hang around because I'll come to my senses sooner rather than later

The amp weighs approx 40kg with all the hardware mounted so postage is impossible. Collection only please.

Will consider splitting but really would like to see the amp go as one lot.

Prices for individual bits are:
Case - £100
GB300D modules - £40 each(inc postage)
GB300S PSU - £30(inc postage)
Toroids - £20 each(inc postage)

These photo's aren't the most recent, a little more work has been done on the wiring and rear panel. As you can see its not far off complete though.












_________________________

As well as the above I have six toroids, all are brand new and still boxed. Include mounting hardware: nut/bolt as well as top plate and rubber gasket.

Specs are:

Primary: 240v
Secondary: 45-0-45v 500VA

These are the same as the ones in the photo's above.

They're pretty heavy at around 6kg each so postage will be around £6-7. Collection is welcomed and I'm in Chesterfield, Derbyshire.

Price each - £20 inc postage or all six for £100 inc postage.

[richie00boy]

Where are the toroids from originally? CPC? Might be interested in one.

[Tim F]

Hi Shinobiwan
Not had time to log on for a few days so it must be fate 'again'
Will take the amp if your sure you want to sell it.
Won't be able to collect until tail end of next week if you need money sooner let me know.
Tim

[ShinOBIWAN]

Originally posted by Tim F
Hi Shinobiwan
Not had time to log on for a few days so it must be fate 'again'
Will take the amp if your sure you want to sell it.
Won't be able to collect until tail end of next week if you need money sooner let me know.
Tim

Hi Tim good to hear from you again.

I've got your email so will contact you through that mate.

[ShinOBIWAN]

Originally posted by richie00boy
Where are the toroids from originally? CPC? Might be interested in one.

Hi Rich,

They're the Farnell ones. I think they're branded 'toroid' with a little hedgehog logo if I remember, no actually I think it was multicomp. One of those two anyway.

I'm no expert but they seem good quality and the four I've had working don't buzz or anything like that.

[ShinOBIWAN]

Amp sold to Tim.

[richie00boy]

OK cool they are the same as what CPC sell. I'll take one of them. Can pay now and collect at xmas if you want? Might be up there in a few weeks but defo will be at xmas.

[ShinOBIWAN]

Sent you mail Rich.

[gaborbela]

Hi ShinOBIWAN
I would like to know if you still have the GB-300D modules
I'm interested on a pair .

Regards Jeno

[ShinOBIWAN]

Originally posted by gaborbela
Hi ShinOBIWAN
I would like to know if you still have the GB-300D modules
I'm interested on a pair .

Regards Jeno

They're in with the amp as whole at the moment and I've had an offer from Tim which I've accepted.

If anything changes I'll let you know.