diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Swap Meet (http://www.diyaudio.com/forums/swap-meet/)
-   -   FS: DIR9001 to CS8412 converter board (http://www.diyaudio.com/forums/swap-meet/110738-fs-dir9001-cs8412-converter-board.html)

spencer 26th October 2007 03:45 AM

FS: DIR9001 to CS8412 converter board
 
2 Attachment(s)
This is a newly completed project for a DIR9001 to be used in CS8412 socket digital receiver DACs. The board is proven working in my D1 Ver2 clone DAC and will also be working in other DAC which accept 16 or 24 bit format as stated in DIR9001 data sheet. The only thing I want to highlight is the low 50ps jitter of DIR9001 compare to old receier 8414/8412 with >200ps jitter.

Price is US$5 with below content:
1. Two 14 pins strip.
2. 4 0.1uF smd chip cap
3. 2 10uF smd chip cap
4. 1 22uF smd chip cap
5. Some 2.5mm pins
6. One smd bead

Buyer pay shipping $1 for normal airmail and $3 for registered airmail. Paypal charge is 4%.

The rest of parts can be ordered from Farnell. Interersted please PM me.

spencer 26th October 2007 03:46 AM

2 Attachment(s)
This is bottom view:

spencer 26th October 2007 03:48 AM

2 Attachment(s)
This is circuit and BOM etc...

spencer 26th October 2007 02:21 PM

2 Attachment(s)
To be clear of what parts are provided, here is an excel file of the BOM.

spencer 26th October 2007 03:05 PM

2 Attachment(s)
Here is the update BOM as the last one is missing some Farnell part number.

spencer 27th October 2007 12:16 PM

2 Attachment(s)
Since some chip parts are not cheap to order small quantity, I shall offer the kit without 3 ICs at US$6. Here is the BOM again.

Interested can PM me.

spencer 27th October 2007 12:46 PM

2 Attachment(s)
Here is a photo how R2 is soldered to the Pin 9 and 10 of the board on the left hand side.

guglielmope 28th October 2007 12:02 AM

Hello,
interesting, but do you have available also a full kit?
and how much it'll costs shipped in Italy?
you can contact me directely at my email.
Ciao
Guglielmo

theAnonymous1 28th October 2007 12:54 AM

Guglielmo,

If Spencer cannot provide them, I have one extra each of DIR9001, AM26C32ID, and TLV1117-33(substitute for LD1117S33TR).

guglielmope 29th October 2007 10:34 PM

Hello,
Thanks a lot, I'm tryng with TI to receive a free sample of DIR9001, may be if I'm luky.
At next message.
Ciao
Guglielmo


All times are GMT. The time now is 07:34 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2