I have finally pulled these from my amps.
They are Elna Cerafine 10000uF/100V caps with mounting clips. Case size is 110mm high x 52mm diameter and each weigh 350g.
I have 16 used available - photo shows condition (terminals bent at 90 degrees to facilitate wiring in my amps). I would like US$8 each for these (or AUD10 for Aussie buyers).
I also have 4 unused ones (terminals haven't been bent), which I want US$12 each for (or AUD15).
Preference is to sell within Australia - international freight charges would be almost as much as the caps.
They are Elna Cerafine 10000uF/100V caps with mounting clips. Case size is 110mm high x 52mm diameter and each weigh 350g.
I have 16 used available - photo shows condition (terminals bent at 90 degrees to facilitate wiring in my amps). I would like US$8 each for these (or AUD10 for Aussie buyers).
I also have 4 unused ones (terminals haven't been bent), which I want US$12 each for (or AUD15).
Preference is to sell within Australia - international freight charges would be almost as much as the caps.
Attachments
Hi Dan
They have been in a couple of amps for about 9 years. I only have 12 used ones left, but I have now listed these on ebay in 3 batches of 4:
http://cgi.ebay.com.au/ws/eBayISAPI...m=300151300859&ssPageName=STRK:MESE:IT&ih=020
or search for "elna cerafine" on ebay.com.au
Smithy
They have been in a couple of amps for about 9 years. I only have 12 used ones left, but I have now listed these on ebay in 3 batches of 4:
http://cgi.ebay.com.au/ws/eBayISAPI...m=300151300859&ssPageName=STRK:MESE:IT&ih=020
or search for "elna cerafine" on ebay.com.au
Smithy
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.