• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

f/s: Crystal Dac, Joshua Tree log Attenuator, butler x-over (all balanced)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
so i'm thinking about streamlining my signal path (since my source unit is a computer) and selling my audiophile grade dac, balanced attenuator, and even my balanced 3 way butler/phaze x-over


here is some info on the components:
dac:
53e.jpg

122 s/n ratio, 192/24 bit, balanced output
http://www.cirrus.com/en/pubs/rdDatasheet/cs43122eb-1.pdf
http://www.diyaudio.com/forums/showthread.php?threadid=15551&perpage=15&highlight=&pagenumber=1
$400 (a coworker is thinking about buying this but if he backs out It'll be available, i should know by Wednesday.)


volume control:
http://www.twistedpearaudio.com/joshuatree/jt.aspx
built by the guys over at twistedpear and the unit has never been used. It's the balanced (dual board version)
$139

Butler Audio designed Phaze audio x-over:
the x-over is a 'tube' x-over with 12 or 24 db slopes. high pass, band pass and low pass outputs. built for car use but has a 12v input for a wallwart power supply that was specifically meant for making this unit ready for home use. I dont have the original owners manual for this but i do have the formula's to determine the
x-over frequencies (determined by resistor values)
This is pretty rare and def. hard to find. $250


I'll sell these seperately but would rather sell them as a whole (discounted of course). I don't have a lot of history on this forum, but i can give you my ebay id and two other forum id's so you can confirm that i'm a reputable seller.

anyways... let me know if you're interested. If i dont reply to this thread it is only because i dont always get updates for this forum. please feel free to email me or send me a pm

thanks for looking :)

's

's
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.