Twisted Pear My Ref Rev C built modules

Stuey · 5th September 2007, 01:05 PM

Hi there,

I have two built modules of Mauro Penasa's My Ref Rev C for sale.

These are the Twisted Pear ones sold by Russ White and Brian Donegan over at:

http://www.twistedpearaudio.com/revc/revc.aspx

See here for info.

My "audiophile" LM3886 approach

They sell for US$134 for boards and parts.

I want AU$130 for the two built up boards - postage at cost.

These have never been powered up and are very well built, see pics. All standard parts as per the Twisted Pear kit.

All they need for operation is a 25V-0-25V transformer of around 225+ VA. Rectifier bridge and PSU caps are on board.

Payment by Paypal OK.

Stuey

Stuey · 5th September 2007, 01:07 PM

...and the clean soldering on the bottom...

Stuey · 5th September 2007, 02:06 PM

I should have mentioned that this is about US$105. I hope this is considered fair.

Piek · 5th September 2007, 02:30 PM

Any clue about shipping costs to Germany?

Thanks, Micha

Stuey · 5th September 2007, 02:48 PM

Hi Micha,

I'll check tomorrow (my time - it's 11pm now) and post here.

They will be well packed and also come with all the faston connectors etc. that were supplied with the kit.

Thanks

Stuey

thegeek · 5th September 2007, 03:35 PM

I'm also interested.

If shipping to Norway is less than $50, I'm ready to pay:P

Stuey · 6th September 2007, 12:37 AM

Ok thegeek, I'll quote for Norway postage too, in case Micha isn't taking them.

Can I just add that there is a tiny soldering iron mark on one of the tiny red plastic Wima caps, but this won't affect it. Just to be very honest about them.

Cheers

Stuey

thegeek · 6th September 2007, 01:28 AM

For me the soldering mark is certainly not a problem, worst case it's dead but I have plenty of replacements;P

Stuey · 6th September 2007, 05:20 AM

Hi guys,

Postage is AU$24 to both locations (unless you want any fancy stuff like insurance).

Cheers

Stuey

thegeek · 6th September 2007, 12:03 PM

Well, I'm ok with that.
Unless you want to wait for a reply from Piek we can finish this right away

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twisted Pear Opus Modules	sbrtoy	Swap Meet	8	12th May 2009 09:30 PM
MyRef Rev C, Chipamps, Twisted Pear Modules, Lots of goodies!	sbrtoy	Swap Meet	13	14th March 2009 11:54 PM
Twisted Pear Buffalo Dac and Ivy modules - built - for sale	phrarod	Swap Meet	3	17th January 2009 02:25 AM
FS: Twisted Pear Opus DAC	mdlover	Swap Meet	5	14th October 2008 03:33 AM
Twisted Pear Audio	exurbia	Everything Else	13	23rd May 2007 04:18 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th September 2007, 02:06 PM	#3
Stuey diyAudio Member Join Date: Mar 2006 Location: Perth, Western Australia	I should have mentioned that this is about US$105. I hope this is considered fair.

5th September 2007, 02:30 PM	#4
Piek diyAudio Member Join Date: Oct 2006	Any clue about shipping costs to Germany? Thanks, Micha

5th September 2007, 02:48 PM	#5
Stuey diyAudio Member Join Date: Mar 2006 Location: Perth, Western Australia	Hi Micha, I'll check tomorrow (my time - it's 11pm now) and post here. They will be well packed and also come with all the faston connectors etc. that were supplied with the kit. Thanks Stuey

5th September 2007, 03:35 PM	#6
thegeek diyAudio Member Join Date: Jun 2005 Location: Trondheim	I'm also interested. If shipping to Norway is less than $50, I'm ready to pay:P

6th September 2007, 12:37 AM	#7
Stuey diyAudio Member Join Date: Mar 2006 Location: Perth, Western Australia	Ok thegeek, I'll quote for Norway postage too, in case Micha isn't taking them. Can I just add that there is a tiny soldering iron mark on one of the tiny red plastic Wima caps, but this won't affect it. Just to be very honest about them. Cheers Stuey

6th September 2007, 01:28 AM	#8
thegeek diyAudio Member Join Date: Jun 2005 Location: Trondheim	For me the soldering mark is certainly not a problem, worst case it's dead but I have plenty of replacements;P

6th September 2007, 05:20 AM	#9
Stuey diyAudio Member Join Date: Mar 2006 Location: Perth, Western Australia	Hi guys, Postage is AU$24 to both locations (unless you want any fancy stuff like insurance). Cheers Stuey

6th September 2007, 12:03 PM	#10
thegeek diyAudio Member Join Date: Jun 2005 Location: Trondheim	Well, I'm ok with that. Unless you want to wait for a reply from Piek we can finish this right away