• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Line Array Drivers - 84 drivers only $200.00!

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
An externally hosted image should be here but it was not working when we last tested it.


(24) Foster wide band drivers

8 ohm
87.3dB
Fs 80.7Hz
Vas 10 liters
Qms 4.267
Qes 1.375
Qts 1.040
BL 3.57
Cms 808.7 uM/N
Mms 4.81g
Re 7.2 ohm
Krm 1.155
Kxm 6.832
Erm 0.818
Exm 0.716
Sd 0.0094 sqM
Le 0.57mH @ 1kHz

Probably best used free air.
25W power handling each


(60) Dayton ND20FA-6 3/4" Neodymium Dome Tweeter

Specifications: *Power handling: 15 watts RMS/30 watts max *VCdia: 3/4" *Impedance: 6 ohms *Re: 5.2 ohms *Frequency range: 3,500 - 25,000 Hz *Fs: 1,800 Hz *SPL: 92 dB 2.83V/1m *Dimensions: A: 1-3/4", B: 1-5/16", C: 3/4".

* Compact neodymium motors have low stray field
* Ferrofluid enhances power handling and helps damp resonance
* Front-mount pressfit design
* Center-to-center spacing as low as 1-3/4"
* Extremely flat and extended response

An externally hosted image should be here but it was not working when we last tested it.


All working with short wires soldered to terminals. ready for your line-array project - $200.00 plus shipping from Ohio
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.