FS: Unfinished ash baffles from my OB project - $25 - Seattle, WA area

owdi · 19th July 2007, 04:48 PM

These are from an unfinished open baffle project. Cutouts are for a Vifa XG18 woofer, and Seas 27TBFC/G tweeter. The cutout for the tweeter on the right baffle is a little too big, not leaving enough room for the screws to dig into the wood. I will include some T-nuts so you can properly mount the tweeter.

These baffles are made out of 1 inch thick Ash, rounded over with a 1/2" bit. The back of the woofer cutout is rounded. Both woofer and tweeter are counter sunk.

There are a few burn marks from when I cut the round-over. You should be able to easily sand them off.

I'm selling them because my original plan was to build a 3 way, but I couldn't find the time to build the bottom end, so ended up with a 2-way.

Dimensions coming soon.

Price is $25 for local pickup in the Seattle area (I live in Bellevue). I would rather not ship them at this time, since they are pretty large.

Dan

owdi · 19th July 2007, 04:55 PM

Bigger pictures....

You can see where I made the cutout for the tweeter too big on the right hand side.

DAn

owdi · 20th July 2007, 03:24 PM

The dimensions are 42" x 9.5"

Here are some pics with the speakers mounted in the baffles.

Dan

KOA · 23rd July 2007, 04:47 AM

i will take them if you will take $20. email kekoach@gmail.com or call me at 206.218.2589

owdi · 24th July 2007, 02:44 AM

You have a deal. They are sold.

Dan

owdi · 26th July 2007, 08:54 PM

Deal fell, through, so these are still available.

Dan

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Murphy Usher two way FS Seattle area	vaughn	Swap Meet	2	6th August 2009 05:11 PM
Table saw in the Seattle area?	cwujek	Full Range	6	8th February 2008 07:58 PM
Anyone in the Seattle area build the Zaph Audio L18/27TBFCG project?	owdi	Everything Else	6	3rd November 2007 04:00 AM
FS: 2x Vifa XG18 for $100 (no shipping if in Seattle area)	owdi	Swap Meet	5	26th September 2007 03:30 PM
Invitation to Seattle area DIYers	Timn8ter	Multi-Way	56	3rd April 2004 01:31 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th July 2007, 04:55 PM	#2
owdi diyAudio Member Join Date: Sep 2003 Location: Bellevue, WA	Bigger pictures.... You can see where I made the cutout for the tweeter too big on the right hand side. DAn

20th July 2007, 03:24 PM	#3
owdi diyAudio Member Join Date: Sep 2003 Location: Bellevue, WA	The dimensions are 42" x 9.5" Here are some pics with the speakers mounted in the baffles. Dan

23rd July 2007, 04:47 AM	#4
KOA diyAudio Member Join Date: Apr 2006 Location: seattle	i will take them if you will take $20. email kekoach@gmail.com or call me at 206.218.2589

24th July 2007, 02:44 AM	#5
owdi diyAudio Member Join Date: Sep 2003 Location: Bellevue, WA	You have a deal. They are sold. Dan

26th July 2007, 08:54 PM	#6
owdi diyAudio Member Join Date: Sep 2003 Location: Bellevue, WA	Deal fell, through, so these are still available. Dan

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)