diyAudio (
-   Swap Meet (
-   -   Free: my old line arrays - pickup only - DFW, Tx (

zobsky 16th July 2007 02:01 AM

Free: my old line arrays - pickup only - DFW, Tx
I built these half a year ago for the princely sum of $30 (using some 3" 45 ohm radio speakers) !! The cabinet was designed as a corner loaded top - firing straight transmission line (that occupies virtually no space in a room) stuffed with some spare polyfill I had lying around. Fs of the drivers is about 300Hz, though the line itself can support a lower frequenct. The cabinets are a little over 5 ft tall each.

The speakers themselves don't sound great, but they don't sound bad either, especially considering how awful the individual drive units sound. All the usual benefits of line arrays, .. around 95dB efficient at 8 ohm, good for annoying neighbors or family alike.

These would benefit from a tweeter unit crossed in around 6KHz or so. A better idea would be to use better drivers (3") and a tweeter. The cutouts are already in the (removable) front baffle, saving anyone a boatload of work. In short, a good experimental platform.

Pickup in Plano (Dallas), Tx this week or they go to the dumpster :bawling:

azngotskills 16th July 2007 05:27 AM

i will pick them up but cant until July 27 :(

All times are GMT. The time now is 02:18 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2