FS tube tuner, Active filter kit, tube amp, amp3

Josephjcole · 4th July 2007, 06:11 PM

Cleaning house getting ready for a move.

I've got:

*Dynaco tube tuner 1950-1960's I can send pictures to anybody who is interested. Worked last time I tried it. Only thing is that it doesn't pull in weak signals very well. I live in the country and could get some stations, but not the one I cared about. I have not used it in a couple of years, but I just plugged it in and it lights up fine.

*active filter board from Bob Ellis, never assembled includes two power supply boards, power supply parts and two transformers. Paid ~$105 for everything.

*a DIY tube amp that a friend built for me and has since died. I never quite figured out what was wrong with it, but I'm pretty sure that all the transformers are still good, tubes are good, choke is good, and stepped attenuator is good. this could be a fixer upper or just for parts. Includes sweet whispers stepped attenuator, out put transformers from old dynaco amp, tubed voltage regulators, large choke and power transformer, (el84 tubes). Sorry I don't have too much more info, I'm happy to e-mail pictures though.

*finally I have a spare amp3 kit. Bought an extra just in case....

I'm not trying to make a killing on any of this, just clear out some junk. make an offer. If anybody wants pictures of any of the items let me know.
thanks
Joe

Josephjcole · 4th July 2007, 08:21 PM

tube amp from the top...

Josephjcole · 4th July 2007, 08:22 PM

bottom side of tube amp

Josephjcole · 4th July 2007, 08:43 PM

So I've gotten more interest than expected in the tube amp and everyone wants to know how much I want for it. I don't really know. So I think I'll just take the best offer I get by the end of this weekend. That seems fair.
here is the rest that I know about it. Push-pull, the driver tubes are 6N1P-EB, I believe the el84's are running triode. there is a constant current source designed by Gary Pimm, voltage regulation is done through tubes, I believe the signal is split using a some kind of transformer? That's about all I really know. sorry.
Joe

Josephjcole · 4th July 2007, 11:20 PM

I just sold the tuner. Still have everything else.
Joe

Tristanc1 · 5th July 2007, 01:55 AM

PM sent in regards to the active filter stuff, let me know if you don't get it, and i'll re-send

Tristan

Josephjcole · 5th July 2007, 09:24 PM

active filter board is sold.
Joe

Josephjcole · 6th July 2007, 01:00 PM

amp3 kit is sold. So now I'm just taking offers on the tube amp.
thanks
Joe

cscmc1 · 17th July 2007, 03:00 PM

Amp still available? What sorts of offers are you getting? Thanks!

Spasticteapot · 20th July 2007, 05:05 PM

I made my offer...

4th July 2007, 06:11 PM	#1
Josephjcole diyAudio Member Join Date: Jun 2004 Location: North Carolina	FS tube tuner, Active filter kit, tube amp, amp3 Cleaning house getting ready for a move. I've got: Dynaco tube tuner 1950-1960's I can send pictures to anybody who is interested. Worked last time I tried it. Only thing is that it doesn't pull in weak signals very well. I live in the country and could get some stations, but not the one I cared about. I have not used it in a couple of years, but I just plugged it in and it lights up fine. active filter board from Bob Ellis, never assembled includes two power supply boards, power supply parts and two transformers. Paid ~$105 for everything. a DIY tube amp that a friend built for me and has since died. I never quite figured out what was wrong with it, but I'm pretty sure that all the transformers are still good, tubes are good, choke is good, and stepped attenuator is good. this could be a fixer upper or just for parts. Includes sweet whispers stepped attenuator, out put transformers from old dynaco amp, tubed voltage regulators, large choke and power transformer, (el84 tubes). Sorry I don't have too much more info, I'm happy to e-mail pictures though. finally I have a spare amp3 kit. Bought an extra just in case.... I'm not trying to make a killing on any of this, just clear out some junk. make an offer. If anybody wants pictures of any of the items let me know. thanks Joe

5th July 2007, 01:55 AM	#6
Tristanc1 diyAudio Member Join Date: Jan 2006 Location: edmonton	PM sent in regards to the active filter stuff, let me know if you don't get it, and i'll re-send Tristan __________________ When I was young I really wanted a bicycle, I used to pray every night for god to bring me one. But as I got older I realized god didn't work that way so I stole one and begged for forgiveness.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I want to build an AM Tube Tuner	sbelyo	Tubes / Valves	24	18th November 2009 09:55 PM
FA: Eico HF-85 Tube Preamp & HFT-90 Tube Tuner	joe-electro	Swap Meet	0	31st May 2009 05:14 PM
FM Stereo Tuner Tube Schematic ?	calico88	Tubes / Valves	5	21st June 2006 03:49 AM
Mcintosh MR65 Tube Tuner	tongkk	Tubes / Valves	0	10th March 2006 03:59 PM
looking for an inexpensive tube tuner	Russell Sit	Swap Meet	0	4th January 2004 03:28 PM

New To Site?	Need Help?
Register to Participate Search Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


<a rel='nofollow' href='http://www.diyaudio.com/openx/www/delivery/ck.php?n=aa5cb2e9&cb=430910' target='_blank'><img src='http://www.diyaudio.com/openx/www/delivery/avw.php?zoneid=3&cb=430910&n=aa5cb2e9' border='0' alt='' /></a>	We're saving for a new server - help us to serve you by Donating Today and become a friend with benefits! Ads on/off / Custom Title / 2009 Tshirt / More PMs / Bigger Images / Advanced printing

4th July 2007, 08:43 PM	#4
Josephjcole diyAudio Member Join Date: Jun 2004 Location: North Carolina	So I've gotten more interest than expected in the tube amp and everyone wants to know how much I want for it. I don't really know. So I think I'll just take the best offer I get by the end of this weekend. That seems fair. here is the rest that I know about it. Push-pull, the driver tubes are 6N1P-EB, I believe the el84's are running triode. there is a constant current source designed by Gary Pimm, voltage regulation is done through tubes, I believe the signal is split using a some kind of transformer? That's about all I really know. sorry. Joe

4th July 2007, 11:20 PM	#5
Josephjcole diyAudio Member Join Date: Jun 2004 Location: North Carolina	I just sold the tuner. Still have everything else. Joe

5th July 2007, 09:24 PM	#7
Josephjcole diyAudio Member Join Date: Jun 2004 Location: North Carolina	active filter board is sold. Joe

6th July 2007, 01:00 PM	#8
Josephjcole diyAudio Member Join Date: Jun 2004 Location: North Carolina	amp3 kit is sold. So now I'm just taking offers on the tube amp. thanks Joe

17th July 2007, 03:00 PM	#9
cscmc1 diyAudio Member Join Date: Jan 2007	Amp still available? What sorts of offers are you getting? Thanks!

20th July 2007, 05:05 PM	#10
Spasticteapot diyAudio Member Join Date: Jan 2006 Location: Wisconsin....what did you expect?	I made my offer...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)