• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Fountek JP-2.0 5" ribbon tweeter pair

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I have a pair of Fountek JP-2.0 ribbon tweeters that were used in a very efficient pair of line arrays that were powered by 15w amps. They were never driven hard and look almost new. The only imperfection is a very slight mark on the left side of one of them, which is very hard to see unless you're looking for it. In the picture below it's on the left tweeter. In the picture it looks much worse than it really is, due to the picture being taken with a flash at about a foot away! It's not really an indented mark but more of a light scuff, probably caused by my finger nail when mounting. That's the only thing I can think of. There is also a gasket on the back that is a little roughed up around the screw holes, which is pretty much irrelevant. When mounted you can't see it but I want to make sure I described them accurately.

I'm looking for $150 for the pair, shipped. These sold for $118 each new plus shipping.

Thanks!
 

Attachments

  • fountek.jpg
    fountek.jpg
    68.8 KB · Views: 293
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.