help making sub filter pcb!

hernanstafe · 16th March 2007, 03:53 AM

Well I was using protel to try and make a pcb for this circuit

http://www.electronicafacil.net/circ...esquema28.html

but for some reason it keeps giving me errors when i load the netlist into the pcb; i've tried to use protel lots of time (Protel 99SE) and it keeps giving me headaches.

Can anyone do me the favor to generate a pcb for that circuit? it has to be single sided, i can give you the sch file if you want, i just need someone to generate the pcb for me cause i keep trying and failing!!

MJL21193 · 16th March 2007, 01:50 PM

I have EW Multisim/Ultiboard. I can give it a shot. One layer or two? Simple enough for one layer. The opamps will be DIP? Two dual or single quad?

djQUAN · 16th March 2007, 02:16 PM

I can see that the page shows the schematic of ESP's P48 subwoofer controller and there is no link to ESP.

http://sound.westhost.com/project48.htm

I smell a copyright violation here............

you can buy ready made boards from Rod from the above link.

MJL21193 · 16th March 2007, 03:23 PM

You are absolutely right djQUAN. Count me out. Have too much respect for Rod's efforts to do that.

hernanstafe · 16th March 2007, 08:00 PM

Hey guys! sorry about that! that page is NOT MINE! i just found it, didn't figure that out. I'm really sorry for that.

Dr.EM · 20th March 2007, 08:23 PM

Wouldn't think there would be any issue with constructing this on stripboard so long as you can afford the potential extra space it would take up?

16th March 2007, 03:53 AM	#1
hernanstafe diyAudio Member Join Date: Feb 2007 Location: Argentina	help making sub filter pcb! Well I was using protel to try and make a pcb for this circuit http://www.electronicafacil.net/circ...esquema28.html but for some reason it keeps giving me errors when i load the netlist into the pcb; i've tried to use protel lots of time (Protel 99SE) and it keeps giving me headaches. Can anyone do me the favor to generate a pcb for that circuit? it has to be single sided, i can give you the sch file if you want, i just need someone to generate the pcb for me cause i keep trying and failing!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need help wana change 60-Hz twin-T notch filter to 279 Hz filter	prorms	Solid State	0	9th February 2008 11:38 PM
Just one big filter cap or more smaller filter caps ...	beppe61	Power Supplies	2	18th July 2006 05:46 PM
Post filter AND pre filter feedback..!	Lars Clausen	Class D	26	14th March 2006 09:38 PM
active filter from rod elliot and sub filter questions	wuffer	Parts	0	2nd October 2005 01:12 PM
chassis-mounted filter or IEC plug filter	jarthel	Solid State	7	11th March 2002 10:17 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th March 2007, 01:50 PM	#2
MJL21193 Account disabled at member's request Join Date: Mar 2007	I have EW Multisim/Ultiboard. I can give it a shot. One layer or two? Simple enough for one layer. The opamps will be DIP? Two dual or single quad?

16th March 2007, 02:16 PM	#3
djQUAN diyAudio Member Join Date: May 2004 Location: manila	I can see that the page shows the schematic of ESP's P48 subwoofer controller and there is no link to ESP. http://sound.westhost.com/project48.htm I smell a copyright violation here............ you can buy ready made boards from Rod from the above link.

16th March 2007, 03:23 PM	#4
MJL21193 Account disabled at member's request Join Date: Mar 2007	You are absolutely right djQUAN. Count me out. Have too much respect for Rod's efforts to do that.

16th March 2007, 08:00 PM	#5
hernanstafe diyAudio Member Join Date: Feb 2007 Location: Argentina	Hey guys! sorry about that! that page is NOT MINE! i just found it, didn't figure that out. I'm really sorry for that.

20th March 2007, 08:23 PM	#6
Dr.EM diyAudio Member Join Date: Oct 2006 Location: Swindon	Wouldn't think there would be any issue with constructing this on stripboard so long as you can afford the potential extra space it would take up?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)