HPSA1000-R for Dayton HF15 midbass/dipole/line array
I can get these amplifiers pretty cheap ($270 shipped/each) and was wondering if theyd work with a dipole midbass line array.
I will have 2 of them, each powering a tower of 4 HF 15s on a 24 x 96" baffle operating up to 250/300hz.
The (4)15s per tower will each present a 4ohm load and I will run each amplifier as either the L or R channel.
Question: Can these operate as monoblocks in stereo operation (use one per channel) and can they extend to 250-300hz?
|All times are GMT. The time now is 03:13 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio