Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Phase control sch needed
Phase control sch needed
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 11th December 2006, 01:41 PM   #1
Flavio88 is offline Flavio88  Italy
diyAudio Member
Flavio88's Avatar
Join Date: May 2005
Location: Roma
Question Phase control sch needed

Hi everybody... i've recently build a bassreflex subwoofer using a Peerless XLS12(8ohm) drived by an hypex ucd400 mudule...

The firtd question is: what is the input sensitivity of this module?(what tension the amp need for maximum power output?)

And, i want to control the phase of my sub with a pot for set the maximum bass pressure possible... I've simulated with EWB the phase shift of the rod elliott phase controller but i've seen thath the phase shift is not the same for all the frequencies, and i don't reached to obtain a 0 situation, someone can explain well the Rod's circuit and help me to obtain a linear(if possible) phase shift between 20 and 90Hz frequencies?

I also accept others schematics
  Reply With Quote
Old 11th December 2006, 02:14 PM   #2
DorinD is offline DorinD  Romania
diyAudio Member
DorinD's Avatar
Join Date: Jan 2005
Location: Bucharest
If you like a schematic with bipolars, see here one of my DIY crossover at @70Hz/24dB/8 with phase shift from 20 to 160 degrees. I'm very pleased with such a good performance using so modest components.

http://www.hi-fi.ro/fhifi/download.php?id=12394 and


Please use 470nF and 22kohm_logarithmic pot for C5 resp. R11 instead of 1uF and 10Kohm.
The inductors and series resistors there are models for those "mini-inductors" of 45mA used in LC filters of little power and the external power supply of 32Vcc is from an HP printer.
All transistors are BC107B and BC177B (hfe~400).
Signal excursion must be under 8Vvv. Phase shift accuracy is resonable good in 25-200Hz spectrum.

Good luck!
  Reply With Quote


Phase control sch neededHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Phase control circuit? DavidJE Subwoofers 5 18th March 2009 05:50 PM
Phase control in 4th order butterworth MFB LPF xitronics Analog Line Level 1 8th June 2007 02:25 AM
motor control by phase angle mitwrong Everything Else 6 5th November 2006 11:39 PM
Circuit for variable phase 0-180 control for active L/R xover georgehifi Solid State 4 20th September 2006 09:55 AM
Subwoofer variable phase control AudioFreak Solid State 23 18th July 2004 03:54 PM

New To Site? Need Help?

All times are GMT. The time now is 03:38 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio