Sono Tube

wingman · 29th October 2006, 09:06 PM

How thick is a sonotube ?
i need a Sonotube about 22" in diameter, would a standard sonotube be stabel ?

looneybomber · 30th October 2006, 09:36 AM

I believe 3/16" to 1/4" depending on brand, or atleast that's what I've heard.

When you say "Stabel", what do you mean? It's not going to support any weight, but due to the fact it's a cylinder, it wont flex in and out so long as you have good sturdy end caps. Line the interior with some kind of sound deadening and you're set. If you want, you could add support rings in the middle of the tube to help deaden vibrations, but they're not needed.

Bjohannesen · 30th October 2006, 01:19 PM

Hi Wingman, I can see you are Danish. Just a tip:
http://www.greif.dk/
I think they have what you need
Hi from Wonderful Copenhagen

wingman · 30th October 2006, 05:56 PM

Quote:

Originally posted by Bjohannesen
Hi Wingman, I can see you are Danish. Just a tip:
http://www.greif.dk/
I think they have what you need
Hi from Wonderful Copenhagen

Thank you !

29th October 2006, 09:06 PM	#1
wingman diyAudio Member Join Date: Jan 2004 Location: jylland	Sono Tube How thick is a sonotube ? i need a Sonotube about 22" in diameter, would a standard sonotube be stabel ? __________________ bass is also audio

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
horn vs sono subs... what to build?	carvernut	Subwoofers	14	25th September 2007 05:09 PM
sono-speaker b3s	skogs	Full Range	4	10th July 2007 07:56 PM
Anyone familiar with the Jensen Sono-Dome Ultra tweeter.	Shoog	Full Range	2	1st June 2005 08:36 PM
18" sono sub?	Kozmic	Subwoofers	1	31st January 2004 03:55 AM
Top heavy sono sub	eRiCdWoNg	Subwoofers	4	29th December 2003 03:32 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th October 2006, 09:36 AM	#2
looneybomber diyAudio Member Join Date: Sep 2006	I believe 3/16" to 1/4" depending on brand, or atleast that's what I've heard. When you say "Stabel", what do you mean? It's not going to support any weight, but due to the fact it's a cylinder, it wont flex in and out so long as you have good sturdy end caps. Line the interior with some kind of sound deadening and you're set. If you want, you could add support rings in the middle of the tube to help deaden vibrations, but they're not needed.

30th October 2006, 01:19 PM	#3
Bjohannesen diyAudio Member Join Date: Jan 2005 Location: Copenhagen	Hi Wingman, I can see you are Danish. Just a tip: http://www.greif.dk/ I think they have what you need Hi from Wonderful Copenhagen

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)