Scanspeak 10" woofers - Page 2

moray james · 17th October 2006, 05:33 PM

work very well in a "W" dipole especially if doubled up as per Linkwitz.

chrish · 20th October 2006, 01:45 PM

Hello,

I am running a stereo pair of twin 25W8565-01 in 90 litre cabinets (total 4 drivers) as per the ariel woofer design. I tried a LT and was not really that happy. These drivers just don't have the xmax required. I am happy with them un-equalised for music. I tend to think of them as woofers, not sub-woofers. For HT I would like a little more down low.

I suggest looking at http://www.linkwitzlab.com/thor-intro.htm

Sigfied Linkwitz really knows what he is talking about. I suggest that his site is a great resource. I wish I had found it before building my Ariels, as I would have built his Orions for sure. Probably still will one day

claudio · 20th October 2006, 10:19 PM

Hi Chrish,
when you tried the LT, which Fsc, Qtc, F3 did you use?
Did you use a sub sonic filter as well?

Gasho · 20th October 2006, 10:47 PM

I think this will do.

http://www.paacoustic.com/Product_De...roductID=TM-12

http://www.paacoustic.com/Product_De...roductID=TM-15

http://www.paacoustic.com/Product_De...uctID=R18-100B

chrish · 21st October 2006, 02:27 AM

Sorry I cannot be much more help at the moment, I have moved house and changed computers, so cannot find the data you are after right now. I can give you this link, however:

http://sound.westhost.com/project71.htm

I used the calculator in the link on that page to use a conservative boost and a Q of .7

Cheers,

Chris

claudio · 21st October 2006, 04:47 PM

Gasho, we were talking of 10" woofers.

Chris, I use this instead: http://www.pvconsultants.com/audio/eq/linktran.htm that gives more infos.

17th October 2006, 05:33 PM	#11
moray james diyAudio Member Join Date: Aug 2003 Location: Calgary on the Bow	The SLS 10 should... work very well in a "W" dipole especially if doubled up as per Linkwitz. __________________ moray james

20th October 2006, 10:19 PM	#13
claudio diyAudio Member Join Date: Feb 2002 Location: Italy	Hi Chrish, when you tried the LT, which Fsc, Qtc, F3 did you use? Did you use a sub sonic filter as well? __________________ ______________________________ My Home Page: www.claudionegro.com

21st October 2006, 04:47 PM	#16
claudio diyAudio Member Join Date: Feb 2002 Location: Italy	Gasho, we were talking of 10" woofers. Chris, I use this instead: http://www.pvconsultants.com/audio/eq/linktran.htm that gives more infos. __________________ ______________________________ My Home Page: www.claudionegro.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ScanSpeak FS: 26W/8867T 10" Aluminum Cone Woofers 8 ohm	Jed	Swap Meet	3	7th March 2009 02:04 AM
FS: BNIB ScanSpeak 26W/8867T 10" Aluminum Cone Woofers 8 ohm	Jed	Swap Meet	0	22nd February 2009 07:13 PM
FS ScanSpeak Woofers	bigLG	Swap Meet	1	21st February 2009 07:49 PM
WTB: Scanspeak 8545 woofers, tweeters	ssmith	Swap Meet	5	9th March 2007 10:18 AM
FS Scanspeak woofers	Ap	Swap Meet	0	4th December 2003 04:21 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th October 2006, 01:45 PM	#12
chrish diyAudio Member Join Date: Oct 2003 Location: Sydney	Hello, I am running a stereo pair of twin 25W8565-01 in 90 litre cabinets (total 4 drivers) as per the ariel woofer design. I tried a LT and was not really that happy. These drivers just don't have the xmax required. I am happy with them un-equalised for music. I tend to think of them as woofers, not sub-woofers. For HT I would like a little more down low. I suggest looking at http://www.linkwitzlab.com/thor-intro.htm Sigfied Linkwitz really knows what he is talking about. I suggest that his site is a great resource. I wish I had found it before building my Ariels, as I would have built his Orions for sure. Probably still will one day

20th October 2006, 10:47 PM	#14
Gasho diyAudio Member Join Date: Nov 2004 Location: Zagreb	I think this will do. http://www.paacoustic.com/Product_De...roductID=TM-12 http://www.paacoustic.com/Product_De...roductID=TM-15 http://www.paacoustic.com/Product_De...uctID=R18-100B

21st October 2006, 02:27 AM	#15
chrish diyAudio Member Join Date: Oct 2003 Location: Sydney	Sorry I cannot be much more help at the moment, I have moved house and changed computers, so cannot find the data you are after right now. I can give you this link, however: http://sound.westhost.com/project71.htm I used the calculator in the link on that page to use a conservative boost and a Q of .7 Cheers, Chris

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read