thinking of making an OB speaker (on my fullrage thread) and was wondering if there was a sub amp that would drive say 2 Dayton RS225's each side, or would i have to use one sub amp per channel, if i can, i would like to use the high pass filter on the sub for the FullRanger on top.
An externally hosted image should be here but it was not working when we last tested it.
no idea if it has a fixed EQ.....
the drive unit measures 3.1 Ohms so i guess its 200w at 4Ohms
I'd go with 8 ohm versions, wire them parallel to get a 4 ohm load for each amp channel. Behringer A500 is a good choice. 230w into 4 ohms per channel. I doubt you would need more than this for OB use. If this were a box sub, then I'd suggest Behringer EP2500 with 650w into 4 ohms per channel or 1200 into 2 ohms. The latter amp has a fan and so would have to go in another room, or in floor/ceiling.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Subwoofers
- OB Sub, which amp?