I while back I built a bessel allignment enclosure for a tempest sub I had. The plans are at this site.
http://www.acoustic-visions.com/~ac...er_drivers/adire_15_tempest/sealedtempest.pdf
I ended up blowing the sub and adire wouldn't cover it under warentee and I never replaced it. I now want to let a friend use the enclosure so that it isn't going to waste. I know I could buy a tempest and put it in there but are there other drivers that may be a little more affordable that I could put in that enclosure?
http://www.acoustic-visions.com/~ac...er_drivers/adire_15_tempest/sealedtempest.pdf
I ended up blowing the sub and adire wouldn't cover it under warentee and I never replaced it. I now want to let a friend use the enclosure so that it isn't going to waste. I know I could buy a tempest and put it in there but are there other drivers that may be a little more affordable that I could put in that enclosure?
Here you could try this driver by Dayton, I believe it is very similar. I have two of them in my car powered by a 1600 watt amp. They sound great and can take alot of abuse.
http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=295-190
They also look alot like the tempest
http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=295-190
They also look alot like the tempest
Mikey p said:It was announced at Creative Sound yesterday.
http://creativesound.ca/
Excellent!
Thanks,
Rob
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.