quality but reasonably priced plate amp

smallangryboy · 6th June 2006, 01:59 PM

I got a replacement driver for my ailing REL Q50, from my friend and supplier at Shadow Works unfortunately it's enormous [see attached] so doesn't fit at all in the enclosure, and as tolerances are a bit tight there isn't room to router any more out, so I thought f@#ck it I'll make up a cabinet and get an amp for it, just to see what it can do.

I wondered what off the shelf plate amps people recommend for a quick prototype, and for reasonable quality ?

smallangryboy · 7th June 2006, 07:29 AM

I've checked this amp out and it seems to fit the bill. Anyone used this before, as I'd like accurate cutout dimensions, especially for the corner radius, so I can select an appropriately sized router for the rebate.

http://www.bkelec.com/MODULES/bsbp200.htm

sreten · 9th June 2006, 01:57 PM

http://cpc.farnell.com/jsp/endecaSea...=LS01562&N=411

/sreten.

smallangryboy · 9th June 2006, 02:37 PM

nice one !

6th June 2006, 01:59 PM	#1
smallangryboy diyAudio Member Join Date: Dec 2004 Location: Oxfordshire	quality but reasonably priced plate amp I got a replacement driver for my ailing REL Q50, from my friend and supplier at Shadow Works unfortunately it's enormous [see attached] so doesn't fit at all in the enclosure, and as tolerances are a bit tight there isn't room to router any more out, so I thought f@#ck it I'll make up a cabinet and get an amp for it, just to see what it can do. I wondered what off the shelf plate amps people recommend for a quick prototype, and for reasonable quality ?

7th June 2006, 07:29 AM	#2
smallangryboy diyAudio Member Join Date: Dec 2004 Location: Oxfordshire	BK Electronics BSBP 200 plate amp I've checked this amp out and it seems to fit the bill. Anyone used this before, as I'd like accurate cutout dimensions, especially for the corner radius, so I can select an appropriately sized router for the rebate. http://www.bkelec.com/MODULES/bsbp200.htm

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
quality of high pass section of a plate amp	pforeman	Full Range	6	27th May 2009 03:44 AM
Any mid priced SE transformers around?	RockysDad	Tubes / Valves	21	21st January 2007 02:25 PM
FS/WTT: Older quality Kenwood stereo amplifier for Subwoofer Plate amp	mtnickel	Swap Meet	1	7th January 2007 03:22 AM
WTB Tonearm. Reasonably Priced.	ramond	Swap Meet	0	12th July 2004 04:08 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th June 2006, 01:57 PM	#3
sreten diyAudio Member Join Date: Nov 2003 Location: Brighton UK	http://cpc.farnell.com/jsp/endecaSea...=LS01562&N=411 /sreten.

9th June 2006, 02:37 PM	#4
smallangryboy diyAudio Member Join Date: Dec 2004 Location: Oxfordshire	nice one !

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)