REL Quake driver specs

Greg3333 · 5th June 2006, 10:24 AM

Does anyone have (or know where I could find) the specifications for the drivers used in the original REL Quake?

I've been in touch with REL and they say they don't have any information they could give me.

Thanks

Greg

richie00boy · 5th June 2006, 11:05 AM

I'm certain REL will have the information. Maybe you should have worded your request differently. They aren't going to give out their specs for people to build clones.

What do you need the specs for, what are you wanting to do?

Greg3333 · 5th June 2006, 11:14 AM

I already have two of the drivers, new old stock. Having the specs for them would help me to work out the best way to use them.

REL technical support were friendly but said they didn't have anything for that model. Obviously someone at REL will have the specs but I wouldn't expect them to go out of their way to find the information for me.

pinkmouse · 5th June 2006, 11:26 AM

Are they the eBay 10" ones? If so, I have a pair as well, and once I get my new soundcard, I will be taking some accurate measurements with Speaker Workshop.

Greg3333 · 5th June 2006, 11:30 AM

That's the ones. I'd be very interested to see what your findings are.

Greg

Ivo_Hristev · 5th June 2006, 12:02 PM

Hi there,
My advice is to measure the desired parameters. That`s the right way ( for me ).

Regards

richie00boy · 5th June 2006, 12:06 PM

OK now I see. Yes I second the suggestion to measure your own specs, even if you had them from REL. It's not too hard if you have a computer with soundcard, power amp and voltmeter capable of reading millivolts. If you are interested I can send you a draft version of a guide I have written which I would appreciate feedback on.

phase_accurate · 7th June 2006, 06:17 AM

I'd go one step further and run them in a bit first. And then I'd measure them.

Regards

Charles

pinkmouse · 9th June 2006, 11:35 AM

Ok, as promised the first set of results, before running in.

Greg3333 · 12th June 2006, 02:54 AM

Pinkmouse, thanks for posting your results.

5th June 2006, 10:24 AM	#1
Greg3333 diyAudio Member Join Date: May 2005 Location: Yorkshire, England	REL Quake driver specs Does anyone have (or know where I could find) the specifications for the drivers used in the original REL Quake? I've been in touch with REL and they say they don't have any information they could give me. Thanks Greg

5th June 2006, 11:05 AM	#2
richie00boy Did it Himself diyAudio Member Join Date: Nov 2003 Location: Gloucestershire, England, UK	I'm certain REL will have the information. Maybe you should have worded your request differently. They aren't going to give out their specs for people to build clones. What do you need the specs for, what are you wanting to do? __________________ www.readresearch.co.uk my website for UK diy audio people - designs, PCBs, kits and more

5th June 2006, 11:26 AM	#4
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	Are they the eBay 10" ones? If so, I have a pair as well, and once I get my new soundcard, I will be taking some accurate measurements with Speaker Workshop. __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

5th June 2006, 12:06 PM	#7
richie00boy Did it Himself diyAudio Member Join Date: Nov 2003 Location: Gloucestershire, England, UK	OK now I see. Yes I second the suggestion to measure your own specs, even if you had them from REL. It's not too hard if you have a computer with soundcard, power amp and voltmeter capable of reading millivolts. If you are interested I can send you a draft version of a guide I have written which I would appreciate feedback on. __________________ www.readresearch.co.uk my website for UK diy audio people - designs, PCBs, kits and more

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th June 2006, 11:14 AM	#3
Greg3333 diyAudio Member Join Date: May 2005 Location: Yorkshire, England	I already have two of the drivers, new old stock. Having the specs for them would help me to work out the best way to use them. REL technical support were friendly but said they didn't have anything for that model. Obviously someone at REL will have the specs but I wouldn't expect them to go out of their way to find the information for me.

5th June 2006, 11:30 AM	#5
Greg3333 diyAudio Member Join Date: May 2005 Location: Yorkshire, England	That's the ones. I'd be very interested to see what your findings are. Greg

5th June 2006, 12:02 PM	#6
Ivo_Hristev diyAudio Member Join Date: Dec 2004 Location: Sofia	Hi there, My advice is to measure the desired parameters. That`s the right way ( for me ). Regards

7th June 2006, 06:17 AM	#8
phase_accurate diyAudio Member Join Date: May 2002 Location: Switzerland	I'd go one step further and run them in a bit first. And then I'd measure them. Regards Charles

12th June 2006, 02:54 AM	#10
Greg3333 diyAudio Member Join Date: May 2005 Location: Yorkshire, England	Pinkmouse, thanks for posting your results.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to understand driver specs?	gasstronamicle	Multi-Way	4	12th November 2007 07:48 AM
help with driver specs	threegee	Subwoofers	19	24th April 2006 05:39 AM
Focal driver specs???	BigSmooth	Multi-Way	0	23rd July 2005 08:26 AM
REL QUAKE amplifier schematic request...	Bas Horneman	Subwoofers	0	4th February 2005 12:35 AM
Any specs on this JBL driver?	Bull	Car Audio	4	19th September 2003 08:21 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read