|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
30th May 2006, 10:04 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2004
Location: Erwin, Tennessee
|
PR Calcs
Am I doing this correctly? Could somebody please check my calcs. I have calculated a conventional SBB4 alignment to produce a Vb of .7ft^3, Fb=33Hz, and F-3=32Hz. My driver has such a large Vd ports are impractical for this alignment. I have assumed two 10 inch passive radiators are adequate each with an effective diameter of 8.125 inches. I have determined each radiator must weigh 292 grams. Is this correct? Does this make sense in an applied perspective?
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need help with Aleph-type CCS calcs | Fuling | Pass Labs | 0 | 19th February 2006 07:31 PM |
| whats up with these SNF calcs? | lemans23 | Multi-Way | 5 | 29th October 2005 06:03 PM |
| frustrated with calcs | sparky3489 | Car Audio | 33 | 3rd October 2005 05:26 AM |
| BSC calcs | Dave Jones | Multi-Way | 1 | 27th March 2005 04:38 AM |
| my heatsink calcs for Zen v4 | faustian bargin | Pass Labs | 34 | 14th December 2003 03:21 PM |
| New To Site? | Need Help? |
