Finished Sub

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
So I finished my project. I'm new to this field so I made an undersized port, which registers an abundance of port velocity (on paper). I have a 150W amp ($50) on the back of this with a TB 8" ($30). Pretty good for $80 in materials. So the $$ was a success. The actual frequency chart was straight enough for me, not audiophile but it works (quite) well when I listened to it. I did hear some bad vibrations coming from the rear, but I think thats because I made the rear cut out too big. I hear no port noise, but maybe thats because the musics too loud.

Pic
http://filebox.vt.edu/users/eag/n6221374_30708453_3696.jpg

video:
http://filebox.vt.edu/users/eag/Movie.wmv

My next subwoofer project won't be for a while, this will satisfy my needs. Its a good first project. Next time I'll factor in everything I missed the first time around.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.