Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Does anybody have the TS for Blueprint 1001 driver?
Does anybody have the TS for Blueprint 1001 driver?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th April 2006, 08:10 AM   #1
toxic tuan is offline toxic tuan  United States
diyAudio Member
 
Join Date: Apr 2006
Location: southern california
Default Does anybody have the TS for Blueprint 1001 driver?

Please help?
  Reply With Quote
Old 9th April 2006, 05:45 PM   #2
xstephanx is offline xstephanx  Canada
diyAudio Member
 
Join Date: Oct 2004
Location: t-dot, canada
Send a message via MSN to xstephanx
why not just measure them? im not an expert on the subject but from what i hear it aint too hard, and depending on how specific you need your parameters, doesnt take that much time/special equipment. Besides usually self measured parameters are more accurate/let you judge consistancy or parameters.
__________________
CREEEAAAAAMMMMM CHEEEEEESSSSSSEEEEEEE!!!!!
EEEEESSSSEEEEEEHC MMMMMAAAAAEEEERRCCC!!!!
  Reply With Quote
Old 9th April 2006, 08:10 PM   #3
toxic tuan is offline toxic tuan  United States
diyAudio Member
 
Join Date: Apr 2006
Location: southern california
The measuring device that I bought from parts express broke.
  Reply With Quote
Old 9th April 2006, 11:30 PM   #4
owdi is offline owdi  United States
diyAudio Member
 
owdi's Avatar
 
Join Date: Sep 2003
Location: Bellevue, WA
I own this woofer, and the manufacturers ts parameters changed a few times. I currently use it in a .6 cu. ft. sealed box, which is definately the most musical setup.

I've also had it in a 1.3 cu. ft. vented enclosure tuned to 28hz w/ a 3" port. This tuning seemed high, because the low end was overpowering and I often heard port noise (the edges of the port were rounded).

My favorite configuration was a 1.6 cu. ft. box with a passive radiator, tuned to 24hz. This shook my house, went very deep, and worked well with music.

Here are the t/s parameters I do have, don't rely on them too heavily.

Fs 21.8 Hz
Re 3.20 Ohms
Qms 4.17
Qes 0.40
Qts 0.37
Cms 520 uM/N
Mms 103 grams
Sd 310 cmsq
Vas 69.5 liters
SPL 84.3dB
BL 10.6 TM
X-max 33mm p-p
Power 250 watts RMS
  Reply With Quote

Reply


Does anybody have the TS for Blueprint 1001 driver?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PS1 SCPH-1001 2: one good, one for parts: $30 pjanda1 Swap Meet 1 2nd July 2009 03:29 PM
PS 1, SCPH-1001 & controller, for parts, $5 pjanda1 Swap Meet 0 17th March 2009 10:14 PM
Blueprint 1001 TS parameters? toxic tuan Multi-Way 0 8th April 2006 09:30 AM
Blueprint Driver Website Has A URL Change kelticwizard Multi-Way 0 8th July 2002 12:38 AM
does someone know the max rms power rating of the Blueprint 1503 driver? pkgum Multi-Way 3 9th December 2001 02:50 PM


New To Site? Need Help?

All times are GMT. The time now is 09:23 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki