Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|9th April 2006, 05:45 PM||#2|
why not just measure them? im not an expert on the subject but from what i hear it aint too hard, and depending on how specific you need your parameters, doesnt take that much time/special equipment. Besides usually self measured parameters are more accurate/let you judge consistancy or parameters.
|9th April 2006, 11:30 PM||#4|
Join Date: Sep 2003
Location: Bellevue, WA
I own this woofer, and the manufacturers ts parameters changed a few times. I currently use it in a .6 cu. ft. sealed box, which is definately the most musical setup.
I've also had it in a 1.3 cu. ft. vented enclosure tuned to 28hz w/ a 3" port. This tuning seemed high, because the low end was overpowering and I often heard port noise (the edges of the port were rounded).
My favorite configuration was a 1.6 cu. ft. box with a passive radiator, tuned to 24hz. This shook my house, went very deep, and worked well with music.
Here are the t/s parameters I do have, don't rely on them too heavily.
Fs 21.8 Hz
Re 3.20 Ohms
Cms 520 uM/N
Mms 103 grams
Sd 310 cmsq
Vas 69.5 liters
BL 10.6 TM
X-max 33mm p-p
Power 250 watts RMS
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|PS1 SCPH-1001 2: one good, one for parts: $30||pjanda1||Swap Meet||1||2nd July 2009 03:29 PM|
|PS 1, SCPH-1001 & controller, for parts, $5||pjanda1||Swap Meet||0||17th March 2009 10:14 PM|
|Blueprint 1001 TS parameters?||toxic tuan||Multi-Way||0||8th April 2006 09:30 AM|
|Blueprint Driver Website Has A URL Change||kelticwizard||Multi-Way||0||8th July 2002 12:38 AM|
|does someone know the max rms power rating of the Blueprint 1503 driver?||pkgum||Multi-Way||3||9th December 2001 02:50 PM|
|New To Site?||Need Help?|