hello, i have a pair of JLx02 2way crossovers and i want to hook one or both of them up to my sub as a low pass filter. however im confused on the markings. it has 3 "TW -" and 1 "TW+" and 1 "W+"and 1 "W-" then "-input"and "+input. what are the tw and w's for? is there a diagram online somwhere for these or can somone tell me how too connect it for low pass(bass only)?
I bet this is a x-over for woofers and tweeters so : TW = tweeter and W = woofer.
Can you play with the frequency on this crossover? It's a passive or active crossover? I'm not sure you can use it for your subwoofer, because the crossover frequency is probably way too high.
Can you play with the frequency on this crossover? It's a passive or active crossover? I'm not sure you can use it for your subwoofer, because the crossover frequency is probably way too high.
richie00boy said:That crossover is passive and for a specific set of component drive units.
It's next to useless for anything else and certainly of absolutely
no use nor even modifyable to be any use, for a sub.
Hi,
I wouldn't say its next to useless for anything else, car crossovers
are notoriously crude, and its probably just as applicable as the
next car c/o for use with a bass mid unit and tweeter.
In can certainly be internally modified to work well.
But as RB says, no use at all in the context of a sub c/o.
/sreten.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.