|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Dec 2003
Location: Zagreb
|
Hi,there
I have a sub trillemma to discuss. I am building a TL subwoofer for a friend of mine to augment the TL fronts which are tuned to 60hz. It will be stereo sub with 10" drivers. Line will be long some 250cm in a 3:1 taper. I don't have a problem constructing a TL, I know how to use MJK's worksheets. Problem is in choosing a right sub driver. My first choice was a Peerless SLS 10". Pretty good driver, but friend insisted on something that goes slightly deeper. Ciare Hw250 seemed as a nice choice. It goes slightly deeper in a same sized TL but it's Cms is 1.8 against the 0.45 of SLS. Which one would you choose? Which has chance to sound more detailed and accurate in bass region on low volumes? Xmax is not that important, because it will be used on pretty moderate volumes. To make thing worse we are also reconsidering HS250 by Ciare a dual voice coil sub with pretty low Fs of 19Hz. Cms is somehehere in middle with value of 1.2. Unfortunately TS parameters are not stated for all 3 connections. Any opinions? |
|
|
|
|
#2 |
|
diyAudio Member
Join Date: Jun 2003
Location: Chamblee, Ga.
|
Greets!
'detailed and accurate in bass region on low volumes?' requires a sysQ = 0.5 with a high Vas (ergo high Qms) and wide enough BW to cover the entire XO BW to ensure a fast rise/settling time (relatively speaking) on modest power, but all things considered, the HS 250 looks pretty good on paper in a Qp = 0.5. GM
__________________
Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| subwoofer project, which subwoofer? | Davlaf | Subwoofers | 12 | 9th November 2006 03:59 AM |
| Subwoofer crossover / subwoofer module design | derMichi | Subwoofers | 4 | 20th April 2006 10:31 AM |
| DCX with subwoofer | compact7 | Subwoofers | 5 | 5th April 2006 03:02 AM |
| how to connect a non powered subwoofer to a stereo system without a subwoofer output | JSD777 | Multi-Way | 4 | 20th September 2005 03:19 PM |
| I need help with subwoofer deisign: HUGE inexpensive subwoofer | hottyson | Subwoofers | 16 | 4th May 2004 03:51 AM |
| New To Site? | Need Help? |
| Page generated in 0.05935 seconds (75.84% PHP - 24.16% MySQL) with 10 queries |