Does anyone have any cabinet suggestions for the Alcone BX10?
Im fairly new to loudspeaker design but taking a look at the T&S parameters it seems a 40L ported design tuned to 35hz seems about right. I haven't used WIN ISD much before so i may be doing something wrong but some of the suggested port lengths seems huge to what i was expecting.
Im really after a bit more extension in the 35-40hz range, i dont need big spl - Just a bit more depth.
Any suggestions very much apprieciated.
Thanks
TSE
Im fairly new to loudspeaker design but taking a look at the T&S parameters it seems a 40L ported design tuned to 35hz seems about right. I haven't used WIN ISD much before so i may be doing something wrong but some of the suggested port lengths seems huge to what i was expecting.
Im really after a bit more extension in the 35-40hz range, i dont need big spl - Just a bit more depth.
Any suggestions very much apprieciated.
Thanks
TSE
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.