help with design SPL box (subwoofer T\S data inside)

Astro Power · 11th January 2006, 12:04 PM

Hii all...

I have power acoustik SQ-12 subwoofer...

i want to build the best box for this sub....to get the maximum.

the T\S parameters :

12 inch subwoofer
2' dual 4 Ohm Voice coil.
600W rms
SPL_____92dB
QTS_____0.4546
QES_____0.49
QMS_____5.82
VAS_____1.52 Cu. Ft
FS______32 Hz
Xmax____0.36 inch

it is for my vehicle..

my size limit of the trunk is :
width: 35.43 inch
height: 19.68 inch
depth: 19.68 inch

thanks
tamir

Volenti · 11th January 2006, 02:22 PM

1.8cuft, port 4'' by 9'' long. street boomer (performance)

1.8cuft, port 4'' by 18'', SQ, bass extension.

1 box with 2 port choices, you can choose whichever works best

[edit] ultimate spl option; Bandpass.

rear (sealed) chamber 0.7cuft, vented chamber 2cuft, port 6'' by 4'' long, sub is mounted with the magnet in the vented section (cooling), note this is an SPL only option, ~6db louder than the street boomer, will sound very one notey/boomy with music.

Astro Power · 11th January 2006, 02:59 PM

thanks !! in the end of the building i will put some pictures of my work !.

edit: how u desing this box ? with winisd?

tamir

Volenti · 11th January 2006, 11:42 PM

BassBox Pro, commercial software with more features than winisd, I use it fo my work.

11th January 2006, 12:04 PM	#1
Astro Power diyAudio Member Join Date: Sep 2004 Location: Binyamina	help with design SPL box (subwoofer T\S data inside) Hii all... I have power acoustik SQ-12 subwoofer... i want to build the best box for this sub....to get the maximum. the T\S parameters : 12 inch subwoofer 2' dual 4 Ohm Voice coil. 600W rms SPL_____92dB QTS_____0.4546 QES_____0.49 QMS_____5.82 VAS_____1.52 Cu. Ft FS______32 Hz Xmax____0.36 inch it is for my vehicle.. my size limit of the trunk is : width: 35.43 inch height: 19.68 inch depth: 19.68 inch thanks tamir

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4th order bandpass, wheel well design :) (design inside)	TWOJZ	Car Audio	28	13th January 2008 03:56 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

11th January 2006, 02:22 PM	#2
Volenti diyAudio Member Join Date: Aug 2003 Location: Australia	1.8cuft, port 4'' by 9'' long. street boomer (performance) 1.8cuft, port 4'' by 18'', SQ, bass extension. 1 box with 2 port choices, you can choose whichever works best [edit] ultimate spl option; Bandpass. rear (sealed) chamber 0.7cuft, vented chamber 2cuft, port 6'' by 4'' long, sub is mounted with the magnet in the vented section (cooling), note this is an SPL only option, ~6db louder than the street boomer, will sound very one notey/boomy with music.

11th January 2006, 02:59 PM	#3
Astro Power diyAudio Member Join Date: Sep 2004 Location: Binyamina	thanks !! in the end of the building i will put some pictures of my work !. edit: how u desing this box ? with winisd? tamir

11th January 2006, 11:42 PM	#4
Volenti diyAudio Member Join Date: Aug 2003 Location: Australia	BassBox Pro, commercial software with more features than winisd, I use it fo my work.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)