help with design SPL box (subwoofer T\S data inside)

[Astro Power]

Hii all...

I have power acoustik SQ-12 subwoofer...

i want to build the best box for this sub....to get the maximum.

the T\S parameters :

12 inch subwoofer
2' dual 4 Ohm Voice coil.
600W rms
SPL_____92dB
QTS_____0.4546
QES_____0.49
QMS_____5.82
VAS_____1.52 Cu. Ft
FS______32 Hz
Xmax____0.36 inch

it is for my vehicle..

my size limit of the trunk is :
width: 35.43 inch
height: 19.68 inch
depth: 19.68 inch

thanks
tamir

An externally hosted image should be here but it was not working when we last tested it.

 

[Volenti]

1.8cuft, port 4'' by 9'' long. street boomer (performance)

1.8cuft, port 4'' by 18'', SQ, bass extension.

1 box with 2 port choices, you can choose whichever works best

[edit] ultimate spl option; Bandpass.

rear (sealed) chamber 0.7cuft, vented chamber 2cuft, port 6'' by 4'' long, sub is mounted with the magnet in the vented section (cooling), note this is an SPL only option, ~6db louder than the street boomer, will sound very one notey/boomy with music.

 

[Astro Power]

thanks !! in the end of the building i will put some pictures of my work !.

edit: how u desing this box ? with winisd?

tamir

 

[Volenti]

BassBox Pro, commercial software with more features than winisd, I use it fo my work.