Bose Cannon

David R. Carlso · 31st December 2005, 09:55 PM

I've been looking over the archives on the subject of the "Bose Cannon" sub woofer. Has anyone tried appling the concept of the Karlson Coupler to the ends of the cannon to smooth out any ripples etc in the freq responce. I would think that It would be usable with ether the straight or the folded types

Destroyer OS. · 31st December 2005, 10:28 PM

Can you provide some more information? I am not sure what one you are talking about....

Perhaps you mean a transmission line / horn box ?

Little secret.... Bose makes ****.

ruerose · 31st December 2005, 11:00 PM

He means this unit:

http://www.bose.com/controller?event...araycannon.jsp

For installation applications.

David R. Carlso · 1st January 2006, 01:32 AM

I guess I should have included this link, so others would be able to play catch up.

http://home.planet.nl/~ulfman/

Karlson Speaker Home page

bwhitejr · 4th January 2006, 05:09 PM

I made an attempt to build a B**e Acoustic Wave Cannon.
This was based on G.R. Koonce' work. I made it to fit in my son's 1983 Dodge Ramcharger, so it is large. The drawing also shows some portable extensions for 20Hz work.

bwhitejr

chops · 4th January 2006, 05:30 PM

Quote:

Originally posted by Destroyer OS.

Little secret.... Bose makes ****.

I just hate it when people say this kind of **** all the time about Bose.

Cal Weldon · 4th January 2006, 06:10 PM

Ok people,

This is not a Bose bashing thread. Anyone who posts anything negative about or for that matter boasts about the product shall be dealt with swiftly. Can you say sinbin?

There are other threads for that. Do a search.

phase_accurate · 5th January 2006, 12:20 PM

Quote:

There are other threads for that. Do a search.

There are not only other bose-bashing threads there is at least one wave-cannon thread !

Regards

Charles

Original Burnedfingers · 5th January 2006, 12:38 PM

Ok,

In an attempt to be politically correct I will mention that the Bose cannons are not by any means efficient in terms of power needed to produce the signal.

phase_accurate · 5th January 2006, 12:42 PM

Quote:

In an attempt to be politically correct I will mention that the Bose cannons are not by any means efficient in terms of power needed to produce the signal.

That seems to be true when you look at the data sheet.

OTOH it is something that can be fun to try out.

Regards

Charles

31st December 2005, 09:55 PM	#1
David R. Carlso diyAudio Member Join Date: Aug 2004 Location: No. CA.	Bose Cannon I've been looking over the archives on the subject of the "Bose Cannon" sub woofer. Has anyone tried appling the concept of the Karlson Coupler to the ends of the cannon to smooth out any ripples etc in the freq responce. I would think that It would be usable with ether the straight or the folded types

4th January 2006, 06:10 PM	#7
Cal Weldon Speakerholic diyAudio Moderator Join Date: Jan 2004 Location: British Columbia	Ok people, This is not a Bose bashing thread. Anyone who posts anything negative about or for that matter boasts about the product shall be dealt with swiftly. Can you say sinbin? There are other threads for that. Do a search. __________________ Next stop: Margaritaville Some of Cal's stuff \| Cal Weldon Consulting

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
bose 901	jerishi	Multi-Way	16	10th December 2006 11:49 PM
No, not Bose!!!	j.burtt	Multi-Way	26	24th May 2006 08:22 AM
He wants BOSE, HELP!!!!!	paul stewart	Multi-Way	4	28th November 2005 07:19 AM
Was Bose right all along?	navin	Multi-Way	50	18th June 2004 02:13 PM
bose 601	kostas	Multi-Way	3	28th December 2003 12:37 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st December 2005, 10:28 PM	#2
Destroyer OS. diyAudio Member Join Date: Nov 2005	Can you provide some more information? I am not sure what one you are talking about.... Perhaps you mean a transmission line / horn box ? Little secret.... Bose makes ****.

31st December 2005, 11:00 PM	#3
ruerose diyAudio Member Join Date: Aug 2005	He means this unit: http://www.bose.com/controller?event...araycannon.jsp For installation applications.

1st January 2006, 01:32 AM	#4
David R. Carlso diyAudio Member Join Date: Aug 2004 Location: No. CA.	I guess I should have included this link, so others would be able to play catch up. http://home.planet.nl/~ulfman/ Karlson Speaker Home page

5th January 2006, 12:38 PM	#9
Original Burnedfingers diyAudio Member Join Date: Nov 2002	Ok, In an attempt to be politically correct I will mention that the Bose cannons are not by any means efficient in terms of power needed to produce the signal.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)