diyAudio (
-   Subwoofers (
-   -   Tweeking Trust SP 3600A subwoofer (

Frank_2001 20th September 2005 10:11 AM

Tweeking Trust SP 3600A subwoofer
Hi All,

I recently installed a Trust SP 3600A 2.1 system in our kitchen to extend our Home cinema system. The setup works great except for the bass, it's far to "boomy". I have "stuffed" the port with some rolled up foam and the effect is almost perfect. Is there anything else I can do to reduce the bass response? The subwoofer is ported to the rear and there is no bass control on the wired remote, only On/Off and Volume.
I suppose that the ideal would be to put a variable high pass filter on the input.

Thanks in advance for any replies.


simon5 20th September 2005 04:55 PM

You could put the subwoofer far away from the floor, ceiling, walls and especially corners. You'll lose some bass that way.

All times are GMT. The time now is 08:18 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2