is this the simplest box calculator on the net ?

[zuki]

i searched for calculators and some need even more info than this one.

and i don't have all the info on a driver for even linear calc.

http://www.linearteam.dk/default.aspx?pageid=newdriver

 

[simon5]

Yes this is the most simple calculator on the net.

You need only Vas, Qts and Fs.

What is the driver you're looking for information about?

 

[zuki]

12" Subwoofer -

Peak Power Handling: 2200 watts per pair / 1100 watts each

RMS Power Handling: 900 watts per pair / 450 watts each

Dual 6 ohm voice coils

100 oz. Magnet

2.5" Kapton Voice Coil

Fs: 20.9 Hz

VAS: 5.73 Cubic ft.

XMAX: 11.1mm

SPL: 88dB

 

[zuki]

how can i find qts ?

 

[simon5]

I can't find anywhere information on the net about this subwoofer, you should try sending a email to JL Audio or the seller or measure it yourself...

 

[simon5]

I finally found the information for you...

This woofer is in the JL Audio 12" Discontinued driver line.
It's a 12W6AE

SUBWOOFER: 12W6AE
Free Air Resonance (Fs): 20.9 Hz
Electrical "Q" (Qes): 0.462
Mechanical "Q" (Qms): 6.897
Total Speaker "Q" (Qts): 0.433
Equiv. Compliance (Vas): 5.73 ft^3 or 162.3 litres
One-way, Linear Excursion (Xmax): 0.438 in or 11.1 mm
Efficiency (1W/1m): 86.9 dB SPL
Effective Piston Area (Sd): 82.5 in^2 or 0.0532 m^2
DC Resistance (Re): 10.8 ohms
Nominal Impedance: Dual 6 ohms
Power Handling (continuous): 300W
Mounting Depth: 5.625 in or 143 mm
Mounting Hole Diameter: 11.0625 in or 281 mm
Driver Displacement: 0.085 ft^3 or 2.4 litres

 

[zuki]

the speaker is a jl audio copy.

made by precision audio and called a J W

maybe it not as good or does not measure correctly.

thank you

a jl12w6 is 350.00 msrp for 1

the jw 12 is 78.00 a pair

that is why i wanted to use them

looking for a diamond for no money