Precison Power PH.15 Subs

[Parm]

Was given a pair of these as a late birthday present last week. Brand new and never been used. Looking to set these up in the man cave for a bit of fun.


Manufacturers suggest a 2.75 Ft cube box with not much info on the port size and dimension.


I'm looking to make a couple of boxes with a slot port arrangement.


Anyone got an ideas or experience with an appropriate enclosure / dimensions ?


Space isn't an issue

 

[chris661]

With no useful specs online, I'd play it safe and put them in the biggest sealed boxes you can.
If you're near Sheffield, give me a shout and I'll measure the T/S parameters for you.

Chris

 

[USRFobiwan]

Look here

 

[bjorno]

Hi All,

FYI:

b

 

[USRFobiwan]

Phantom subwoofers use generous 1.50″ long, 2.5″ diameter 100% OFC Copper voice coils

Don't know if the xmax can be measured from this but looks like 20mm ptp max excursion

 

[bjorno]

Hi All,

Discard my previous Posting as the Advertised Sd BL and SPL sensitivity are not trustworthy.

b

 

[Brian Steele]

Look here

My gosh, with those specs you may as well treat those things as open-baffle drivers...

 

[straight8s]

Im in a similar dilemma, was given a heavy well built 10" car sub in a wedge box that appears to be too small.

I have set up car subs before, in house. They integrated as well and sounds as good as prefabbed boutique brand home subs (in appropriate boxes).

 

[bjorno]

Hi All,

FYI:

b

 

[chris661]

Hey bjorno,
Feels like I haven't seen you around for a while. Good to see you again.

That last sim with the 20Hz tuning frequency looks promising.

Chris

 

[USRFobiwan]

BJorno, sometimes I suspect you're a voodoo-priest..