Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

closet horn/BP6 hybrid : need advices
closet horn/BP6 hybrid : need advices
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th July 2017, 03:51 PM   #1
ejaouen is offline ejaouen  France
diyAudio Member
 
Join Date: Jan 2007
Default closet horn/BP6 hybrid : need advices

Hi, all : here a closet 2 meter high times 0.9 meter wide and 1.2m deep : with the middle part containing four 18" each 300L VAS and qts=0.45 firing :
a) front to a small (lopass chambre 200 liters)= passage (0.2m high : passage length 0.8m to 0.3m) then continuing to the throat of conical (triangle) horn at the back (apex of closet horn) and then "mouth of horn" itself having a restriction in width of 0.15m (so making it also more of a helmholtz cavity in fact ?)
b) back to a bottom cavity (0.5m high) helmholtz chamber with the front of it being a restriction of 0.15m forming a (short) port

I am correctly describing ?
would you describe it more a BP6thorder or more as a tappedhorn ?
I would like advices so as to dimension horn throat (restriction) area where I can still easily adjust it ...
any ideas so to obtain a 65-190hz with highest efficiency response and modelize in winisd and then hornresp ? should I aim 65-140 bandwidth instead as a more realistic/fitting goal ?
highest efficiency in this closet is my goal, I just need to define bandwidth in relation to phenomenes and figures involved .
is front AND back wave use achievable here ?
I welcome all comments/discussions/views ... thanks a lot
Attached Images
File Type: jpg all.jpg (362.8 KB, 94 views)
File Type: jpg horncone.jpg (304.7 KB, 89 views)
File Type: jpg bottom.jpg (422.8 KB, 88 views)

Last edited by ejaouen; 17th July 2017 at 03:57 PM. Reason: adding
  Reply With Quote
Old 17th July 2017, 04:01 PM   #2
ejaouen is offline ejaouen  France
diyAudio Member
 
Join Date: Jan 2007
as of now the amplifier sits on top of 200L wood chamber of the front wave of drivers, the horn part is on top of the amplifier
  Reply With Quote
Old 26th July 2017, 07:53 PM   #3
ejaouen is offline ejaouen  France
diyAudio Member
 
Join Date: Jan 2007
For a driver front and rear wave to be added at a frequency I need to have the 2 path achieving a half wave difference that would be 2.8 m at 60hz : I only have 1.4m (quarter wavelength) now in this build. As of now I do not get good enough summing at 60hz : I will modify : open up mid part (remove vertical wood plank) to try again 6th order BP : bottom and mid part working each the helmholtz way : in this coming case : does the big open cavity formed by the horn impair/modify the activity of the future port being just under it ?
  Reply With Quote

Reply


closet horn/BP6 hybrid : need advicesHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Some advices for a 2 way horn and 15 inch Biscu Multi-Way 39 19th September 2016 09:15 PM
Some advices for a 2 way, horn and 12" ... Biscu Multi-Way 7 11th March 2016 09:30 AM
Simple horn sub. Advices for a newbie! hagr Subwoofers 4 28th April 2009 11:34 AM
Definitive BP6 - woofer and tweeter' impedance Seehyun Multi-Way 1 20th June 2008 12:56 PM
My wacky idea for a hybrid horn loaded woofer/planar widerange hybrid loudspeaker. Spasticteapot Multi-Way 0 30th November 2006 05:16 AM


New To Site? Need Help?

All times are GMT. The time now is 05:14 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki