Alternative Amp for Klipsch KSW-150 Sub - diyAudio
Go Back   Home > Forums > Loudspeakers > Subwoofers
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 29th December 2015, 05:32 AM   #1
diyAudio Member
 
Join Date: Jan 2015
Default Alternative Amp for Klipsch KSW-150 Sub

I have an old Klipsch KSW-150 10" subwoofer that I believe the amp plate is going out as it has a constant loud hum.

Looking for a reasonably priced amp to replace the original 150 Watt amp. Any help or ideas would be appreciated.
  Reply With Quote
Old 30th December 2015, 07:12 PM   #2
diyAudio Member
 
Join Date: Apr 2010
Location: Utah
Hi macster.

Madisound or Parts-express may have something that would work. If you want a plate amp that drops right in without modification you have to pull the old one and take all the measurements. Also somethings to look for is does the amp share the same box volume as woofer. Some amplifiers are not sealed, some are. The original amp is rated at 150 watts at 4ohms so you should find one with about the same output. I believe that your subwoofer is a bass reflex design so you may not want an amp with a fixed bass boost. The Hypex ds 2.0 looks good. Has a higher cost compared to others but has adjustable bass boost and subsonic filter. But isn't sealed. Hope this helps. Good luck.

Matt.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Klipsch KSW-10 Sub (or just plate amp) dkingham Swap Meet 8 26th January 2015 02:47 PM
KSW-12 with a blown amp (was told to post here) mntgoat Solid State 6 28th October 2013 10:44 PM
KSW-12 with a blown amp mntgoat Subwoofers 2 26th October 2013 03:33 PM
Repairing Klipsch KSW-50 aamiic Subwoofers 1 15th April 2013 04:09 AM
Van Alstine Mosfet 150 Modified Dynaco ST 150 Power Amp Scott Novak Swap Meet 1 7th August 2009 11:45 PM


New To Site? Need Help?

All times are GMT. The time now is 05:38 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki