Hi,
Im thinking about building my first speaker, I already have designed a vented box that is tuned around 40 hz. I want to put 2 Dayton audio nd105-4 4" drivers in the box and a plate amplifier, i was thinking about the Dayton audio SA25 25w. Would this be enough power for both drivers? Does anyone have tips for puting the box together?
I would appreciate your help!
Im thinking about building my first speaker, I already have designed a vented box that is tuned around 40 hz. I want to put 2 Dayton audio nd105-4 4" drivers in the box and a plate amplifier, i was thinking about the Dayton audio SA25 25w. Would this be enough power for both drivers? Does anyone have tips for puting the box together?
I would appreciate your help!
If you want to experiment with the drivers (2×4, series for 8 ohm) put them in a
sealed 12 L speaker and you can use the 25 W. You can also test with Linkwitzs.
Hi,
The amplifier manages a paltry 15W into 8 ohms, a very bad idea.
Mentioning LT's is pretty pointless as this level of expertise.
rgds, sreten.
Pointless yes, "very bad idea" - I beg your pardon - no. A sealed 15 L, no correction, just needs a 16W amp for achieving Xmax. For hi-fi, SPL in room, of course not.Hi,
The amplifier manages a paltry 15W into 8 ohms, a very bad idea.
Mentioning LT's is pretty pointless as this level of expertise.
rgds, sreten.
I came across this woofer, Beyma 8Woofer/PV2, would this be a better option?
What kind of box would you recommend, sealed or ported? I want to use it for playing rap music
Works very fine in a sealed speaker or reflex 70 L tuned to 30Hz as an alternative sub enclosure. Use a 30-40/50w RMS amp if using it in BR.
Works very fine in a sealed speaker or reflex 70 L tuned to 30Hz as an alternative sub enclosure. Use a 30-40/50w RMS amp if using it in BR.
does it have to be 70 liter? could i also make it bigger, like 85 liters?
Hi,
BEYMA 8WOOFER/P-V2 pdf, VB = 85.0 L, FB = 28.0 Hz
F3 (in room): 23.5 Hz
Ports (diam/length): 1x9.4 cm/24.11 cm or 2x7.4 cm/31.72 cm.
(Surfaces PS1 : 69.40 cm2, Surfaces PS2 : 86.02 cm2)
With the two port option, less chuffing.
BEYMA 8WOOFER/P-V2 pdf, VB = 85.0 L, FB = 28.0 Hz
F3 (in room): 23.5 Hz
Ports (diam/length): 1x9.4 cm/24.11 cm or 2x7.4 cm/31.72 cm.
(Surfaces PS1 : 69.40 cm2, Surfaces PS2 : 86.02 cm2)
With the two port option, less chuffing.
Attachments
Last edited:
It is a driver for 50W. If using at max SPL or having a very powerful amp 75-100W then ports should be calibrated for the same power or use the double port 3"-4".
Volume displaced by driver: 1.5 L
Volume displaced by (2x) 3" ports: 3 L
Total driver + 2 ports : 4.5 L
VB 85.0 L net + 4.5 L = ~90 L
Volume displaced by driver: 1.5 L
Volume displaced by (2x) 3" ports: 3 L
Total driver + 2 ports : 4.5 L
VB 85.0 L net + 4.5 L = ~90 L
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Subwoofers
- Building my first speaker, advice