Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|4th January 2004, 02:44 PM||#1|
Join Date: Sep 2001
Location: Jakarta, Indonesia
Best TL subwoofer, need advice.
I'm going to build tapered TL subwoofer.
Driver parameter is like this:
fs= 37,328 Hz
Re= 6 ohms
Lvc= ? mH, is this Le and how to calculate this?
Bl= ? n/a, how to calculate this?
Sd= 350 cm2
Vas= 31,839 liter, is this same as Vd in MJK Mathcad?
Qes= 0,449, = Qed?
Qms= 3,121, = Qmd?
Qts= 0,393, = Qtd?
driver position= 0,1"
density= 0,2 lb/ft3
From MJK mathcad (I use TL offset driver.mcd for calc, is it right for tapered TL?) there are 12 graph and only one of it I know (sort of) what it means, that is:
Farfield TL Sound pressure level.
The result shows flat freq. resp. from 30Hz to 100Hz and I think this is very good, am I right?
How about another 11 graphs? Is it showing good result too?
Should I use graph result from MJK TL offset driver using Focal 8V 4412 as reference?
Please, I need your comment and advice for this, before I start woodwork.
Thankyou in advance.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|First subwoofer- advice needed please :)||olly-s||Subwoofers||12||5th May 2008 10:38 PM|
|Subwoofer advice please||Gadgetz||Subwoofers||7||22nd March 2008 11:46 PM|
|Subwoofer Need Advice||mdrake74||Subwoofers||2||16th December 2006 12:32 AM|
|!Need URGENT advice! on subwoofer purchase!||Davlaf||Subwoofers||11||12th November 2006 01:25 AM|
|Newbie needs PA subwoofer advice||poorbutproud||Subwoofers||25||26th July 2002 04:31 PM|
|New To Site?||Need Help?|