Dear all,
I am thinking to buy a DSP for subwoofer project. The requirements are:
1) Flexible low pass filter. Typical crossover option at 80HZ and below is fine; it will be better if it stretch a bit higher.
2) Subsonic filter for protection.
3) Bass boost. Graphic eq (or multiple EQ points) is even better.
4) Transparent and little loss in dynamics.
Any recommendations? (Including DIY project/groupbuy)
Thanks.
WYAN
I am thinking to buy a DSP for subwoofer project. The requirements are:
1) Flexible low pass filter. Typical crossover option at 80HZ and below is fine; it will be better if it stretch a bit higher.
2) Subsonic filter for protection.
3) Bass boost. Graphic eq (or multiple EQ points) is even better.
4) Transparent and little loss in dynamics.
Any recommendations? (Including DIY project/groupbuy)
Thanks.
WYAN
Last edited:
Hypex also has plate amps:
AS2.100 Digital 2x100W and the bigger brother PSC2.400d for 2x400W. There is an even bigger one but I don't think you need 2x700 W =)
They can all be bridged into one channel if you don't need two. If you don't need digital input they have analogue input only versions that are slightly cheaper.
AS2.100 Digital 2x100W and the bigger brother PSC2.400d for 2x400W. There is an even bigger one but I don't think you need 2x700 W =)
They can all be bridged into one channel if you don't need two. If you don't need digital input they have analogue input only versions that are slightly cheaper.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Subwoofers
- Sub DSP recommendation