Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|29th October 2013, 06:29 PM||#1|
Join Date: Sep 2009
BK Monolith build
Hi fellas - I just bought a BK sub woofer plate from the monolith plus 500w.
I have ordered the eminence driver and the MDF.
The dimensions of the sub are 540h x 420w x 560d
My question - the driver is set in the 420x560 dimension, but given my room set up I would much rather set it in the 560x540 dimension and have less sub projecting into the room.
So have it FF in the side rather than DF in the bass.
Is performance about the volume of the enclosure and port length, or are the dimensions key as well?
Many thanks for your thoughts on the matter.
Ps - I'm mainly aiming to use it as a beef up for my Full Range drivers, so question number 2-would having this as a sealed system alter it badly, other than the loss of volume?
Last edited by lorienblack; 29th October 2013 at 06:58 PM.
|31st October 2013, 04:19 AM||#3|
Join Date: Nov 2003
Location: Brighton UK
You can put the driver on the front changing the width and depth.
The dimensions matter little, about 100L internal tuned to 22Hz.
Sealed would be about 40/50L stuffed and would work fine,
but not the same in terms of the extreme bass extension.
There is nothing so practical as a really good theory - Ludwig Boltzmann
When your only tool is a hammer, every problem looks like a nail - Abraham Maslow
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Frugal Horn vs BK-12m vs BK-16||ruinevil||Full Range||0||26th March 2013 07:14 PM|
|The Monolith ( Dayton 8)||jonparkhurst||Full Range||10||7th November 2012 11:24 PM|
|BK mosfet amp build||jamesfeline||Solid State||7||14th April 2012 01:19 PM|
|bk monolith subwoofer help||larksp||Subwoofers||8||27th April 2011 06:34 AM|
|Monolith First Impressions||bjackson||Multi-Way||7||17th May 2005 12:37 AM|
|New To Site?||Need Help?|