RCA Subwoofer problem - diyAudio
Go Back   Home > Forums > Loudspeakers > Subwoofers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 5th December 2003, 02:45 AM   #1
diyAudio Member
 
Join Date: Sep 2003
Location: Illinois
Default RCA Subwoofer problem

I have a RCA subwoofer I am fixing for somebody. It was given to me not working. It has a 200W amp, and a 12inch sub speaker. The amp worked fine, but the problem was the speaker. The negative input wire connecting to the cone from the input pins on the spaker had a bad connection. I soldered it, and finally got it to work. The impedence of the speaker is 4-ohm, and my DMM measured 4.5. when I wiggled the wire it would jump around from 4.5 to around 5.5 ohm. Is this bad for the amplifier? Would it be better to just buy a car sub from cirucit city or best buy and replace it? I do notice that the speaker rattles if turned too loud and don't know if it is the bad connection or bad speaker. It could be just do to the fact that RCA does stand for Really Crappy Appliances

Should I just buy a new speaker?
  Reply With Quote
Old 5th December 2003, 02:54 AM   #2
Guss is offline Guss  Canada
diyAudio Member
 
Guss's Avatar
 
Join Date: Jun 2003
Location: Montreal
Don't worry about the imp, its always better not to get under the load tap...No dont buy another speaker, it wouldn't fit the box. If it rattle try remove some gain with the EQ directly on the bass amp.
  Reply With Quote
Old 5th December 2003, 02:58 AM   #3
BAM is offline BAM
diyAudio Member
 
Join Date: Sep 2001
Location: Carmel, IN; West Lafayette, IN
Send a message via AIM to BAM
(In case you're wondering what soundNERD means when he says the new woofer won't fit the box, consider this: There is more to a driver ditting in a box than the frame size. There are various electromechanical parameters that the woofer has, and the box is sized and tuned to those electromechanical parameters such that the driver delivers the flattest, most extended frequency response possible.)
  Reply With Quote
Old 5th December 2003, 03:07 AM   #4
Wizard of Kelts
diyAudio Moderator
 
Join Date: Sep 2001
Location: Connecticut, The Nutmeg State
The speaker rattles when played too loud?

Maybe a rubbing voice coil? In that case, you would need a new speaker.
__________________
"A friend will help you move. A really good friend will help you move a body."
-Anonymous
  Reply With Quote
Old 6th December 2003, 02:13 AM   #5
diyAudio Member
 
Join Date: Sep 2003
Location: Illinois
I am pretty sure that RCA wouldn't spend too much time designing a perfectly tuned box. i mean, come on, its an RCA sub.

I didn't buy a new speaker yet. The thing is just that with the current one, when one of the wires connecting to the cone from the connection pins is jiggled, the resistance changes. I don't think that that is right. I was thinking that it might be better to just go and buy a new sub speaker.

About the rattling, I almost thought it was something like that, but is is a cheap speaker with a small magnet, so maybe it just can't go that loud. The speaker and the amp are tightened as tight as they were originally from the factory, so I am pretty sure it is the speaker.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with my subwoofer tareqx2 Subwoofers 4 24th October 2008 02:57 AM
tube amp subwoofer hum problem timolien Tubes / Valves 3 13th September 2006 02:41 PM
subwoofer problem.HELP!! sachi Subwoofers 6 2nd March 2005 07:12 PM
Subwoofer distortion problem lordy Subwoofers 11 16th January 2004 03:43 AM


New To Site? Need Help?

All times are GMT. The time now is 06:22 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2