If you are that concerned about changes in t/s values, then you want the values for YOUR driver, not a broken in driver from somewhere else.
Otherwise use the PE specs. They are accurate w/i production variations for the RS / RSS series and change in proportion during break-in. That is, your modeled response won't be significantly different.
Otherwise use the PE specs. They are accurate w/i production variations for the RS / RSS series and change in proportion during break-in. That is, your modeled response won't be significantly different.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.