Hey thanks for the response. I'm thinking of using an enclosue like the one in the attached image...
Hi leosep,
First you need to find out the proper T/S...Here is an attempt and another type of box:
b
Attachments
Can i use this driver in the attached image for my home subwoofer?
Depends on what you are expecting out of it. I would say it is not the best choice for HT. It could work for music to help small speakers. If you can give more details of what you want to end up with you will get better answers.
Another woofer
Im planing to use it for movies and music in my bedroom.
I have another driver with this specs:
Sensitivity: 92dB (W/M)
Impedance: 8ohm
Re: 6.8ohm
Le: 0.989mH
Frequency response:
45Hz~6KHz
Fs: 68Hz
Qts: 0.56
Qes: 0.69
Qms: 3.3
Vas: 10.86 liters
Xmax: 5.4mm
Overall frame diameter: 8.27"
Required cutout: 7.17"
Mounting depth: 3.94"
Will this one work better?
I have these 2 drivers in my closet. I want to do something with them. What are thy good for?
Im planing to use it for movies and music in my bedroom.
I have another driver with this specs:
Sensitivity: 92dB (W/M)
Impedance: 8ohm
Re: 6.8ohm
Le: 0.989mH
Frequency response:
45Hz~6KHz
Fs: 68Hz
Qts: 0.56
Qes: 0.69
Qms: 3.3
Vas: 10.86 liters
Xmax: 5.4mm
Overall frame diameter: 8.27"
Required cutout: 7.17"
Mounting depth: 3.94"
Will this one work better?
I have these 2 drivers in my closet. I want to do something with them. What are thy good for?
Last edited:
The first driver, if it's specs are correct, is a much better candidate for a sub woofer.Im planing to use it for movies and music in my bedroom.
Will this one work better?
I have these 2 drivers in my closet. I want to do something with them. What are thy good for?
The second driver, with an Fs of 68 Hz, more than an octave higher than the low note on a 5 string bass, would be considered more of a mid-bass candidate by most sub folks.
This driver is a pro driver with a high Fs (68Hz) not good for a subwoofer.Im planing to use it for movies and music in my bedroom.
I have another driver with this specs:
It's a "Full range speaker" "Ideal for sound reinforcement, monitor and musical instrument use" and "Optimized for vented enclosures". You can have it in a BR 22L/45Hz and F3=46Hz (38Hz in room) or crossed to a subwoofer @90/100Hz in a sealed box ~20 L.
Attachments
Im planing to use it for movies and music in my bedroom.
the first one with high Qts...simply mount it in plate, and push it under your bed
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Subwoofers
- Can i use this driver for home subwoofer?