Which TB sub would you prefer? - diyAudio
Go Back   Home > Forums > Loudspeakers > Subwoofers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th October 2003, 05:59 AM   #1
diyAudio Member
 
Join Date: Jan 2002
Location: Spfld, OR
Default Which TB sub would you prefer?

I want to use one of the two little sub drivers that Tang Band has, but I don't know which looks better. They are the 8" and the 6x9 at Nuera-Acoustics. The 8" seems to respond a bit deeper, but That 6x9 yeilds some cool design opportunities.

Enyone have any experience with these?
  Reply With Quote
Old 25th October 2003, 04:41 PM   #2
JoeBob is offline JoeBob  Canada
diyAudio Member
 
JoeBob's Avatar
 
Join Date: Nov 2001
Location: Montreal, Canada
RAW's site had a great article about the TB 8" and it's MCM counterpart. Basically, from reading it I can tell you that you'd going to need a passive radiator to get anything low out of it, but apparently with a radiator it'll work well for an 8" (the passive radiator threw me off).
  Reply With Quote
Old 25th October 2003, 06:51 PM   #3
CSS/XBL is offline CSS/XBL  Canada
diyAudio Member
 
Join Date: Oct 2003
The 8" with a PR works really well. Koonce and Wright are working on an article using the 8" in a small ported enclosure. I think it will appear in Audio Xpress.

Bob
  Reply With Quote
Old 26th October 2003, 09:41 AM   #4
diyAudio Member
 
Join Date: Jan 2002
Location: Spfld, OR
Two things... What is "RAW", and which of MCM's drivers is considered it's counterpart?
  Reply With Quote
Old 26th October 2003, 10:00 AM   #5
diyAudio Member
 
Join Date: Mar 2002
Location: Sweden
The 8" driver featured on the Nuera site works quite well in a small closed enclosure, ~12 litres or so if i remember correctly, with some help. With a linkwitz correction circuit it has even better measured performance than the REL Quake woofer.

Sonicly the sound is good. Not "slow" to my ears. Bare in mind that i havent build ths woofer myself so i cant provide any construction hints.

Pic of finished woofer - http://w1.223.telia.com/~u22311088/B.../blast4_21.jpg

Good luck. Regards // Mattias S
__________________
Swedish DiyForum: www.diyforum.net
  Reply With Quote
Old 27th October 2003, 01:44 PM   #6
RAW is offline RAW  Canada
diyAudio Member
 
Join Date: Jul 2002
Location: British Columbia ,Canada
what is Paulinator
The W8-740C as well as the MCM 55-2421
MCM made this copy of the TB after Nuera had the W8 made.
Good idea but the compliance of the MCM just gets too loose after around 20hrs of use.
The suspension just drops in this driver.

The W8 stays put. After almost a year of going over this design Bob Wright and Bob Koonce contacted me and asked if I would do a artical with them and send them all my info to start on the 8" subs.
Well they went after MA drivers every 8" SUB they could get.
They settled with the TB after 2 months of looking and testing.
They have since made a folded ported cabinet for the TB.As Bob said this will be out in the following months of AAE.
Working with them I am getting all the info I have on them as well as the PR'S i have tested, weighted, methods ect.
Then supply them with my MLSSA measurments.

As it stands today I just finished weighting the single CSS PR to 200g for a lower tuning over the stock CSS PR.For those wanting a lower punch out of the 8" for HT use.But Audio use you will be happy with the stock PR and the higher tuning.
The AMP we used had a boost of 6db at 35 and worked out great for this little driver.
But ported get ready for some fancy bends I will tell you.24" long with flared ends to boot.

Have fun with the 8" sub

AL
OR
RAW
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
What big cap do you prefer? why? foo Parts 11 8th July 2011 05:30 AM
PS vs Silver Mica -- which do u prefer? jackinnj Parts 1 3rd November 2005 02:34 PM
Which principle should I prefer? ChocoHolic Subwoofers 6 20th June 2004 10:56 PM
prefer IRFP 240 or 244 jeclk Pass Labs 2 11th January 2003 08:41 PM


New To Site? Need Help?

All times are GMT. The time now is 07:20 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2