Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Need help with ripole
Need help with ripole
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 17th August 2012, 06:27 PM   #1
DBog is offline DBog  Brazil
diyAudio Member
Join Date: Jul 2012
Location: Porto Alegre, Brazil
Question Need help with ripole

Need help with a ripole (to use in a hybrid ESL)

I am in the DIY for some time. As I live in Brazil, we have very limited options of quality drivers for an affordable price. I am a big fan of the ESL qualities, but I am pretty aware of the limitations of this design. Considering this one of the arragements that mostly attracted my attention was an hybrid design with an ESL handling mid-bass and high frequencies and normal (sub) woofers managing the low end.

I was looking for design that could pair with ESLs to handle low frequencies and I end up choosing woofers in a cardioid restricted dipole (ripole) arrangement. I did some research but unfortunately there are very few sources of information about ripoles online. So I am asking for some advice from the most experienced members of this community. I pick some of the information pieces available and ended up with the following design:

NAR Audio 12” Subwoofer 1204-SW-2
Qts= 0.841
Xmax= 7,25mm
Fo=22.153 Hz
Sd=551.55 cm²
Revc=3.600 Ohm
Levc=1.690m H
Md=44.000 g
BL=8.066 T•M
Qms= 6.715
Qes= 0.961
No= 0.195 %
SPLo= 84.9 dB
Vas=178.658 l
Cms=413.584u M/N
Mms=124.794 g
Mmd=117.346m Kg

Ripole box dimensions:
Back port: 2 x 15cm x 10cm = 300cm²
Front port: 15cm x 20cm = 300cm²
Internal dimensions of the woofer baffles: 15cm x 15cm
MDF with 2.5cm thickness

Woofers arranged in series and a passive crossover around 100hz.

My assumptions are:
Linear (as much as possible) from 20 to 20Khz
Low SPL is not a problem (as I plan to use ESLs)
Clear and well defined bass (specially aiming jazz and progressive music)
Do not want a wall-shaker but want to clearly “notice” all the lows of an acoustic bass
I will be using an old-style tube amp

Any suggestions?

  Reply With Quote
Old 19th August 2012, 12:08 AM   #2
elac310 is offline elac310  France
diyAudio Member
elac310's Avatar
Join Date: Nov 2007
Location: Strasbourg

I, too, have spent some time studying the ripole concept and I just completed a big subwoofer system (that would fit in with my high sensitivity horn system).

In your place, even if ESL have a low sensitivity, I would go for somewhat larger speakers (say 15" or 18") if you are really looking for the lowest frequencies and some decent level. If you use a dedicated amp and electronic crossover including maybe also some equalizing possibilities, that would give you much more flexibility to adjust the sound level to your taste. I was given the same advice by others a few months back, and I do not regret following this approach.

As regards the enclosure, ripoles use in principle a different load for the front and for the back side of the speaker cones. If you do a google search for pictures with "ripole" (try also "ripol" and you get more from German DIYer projects since the concept is quite popular there) you will see that one vent is normally larger than the other (in practice, it's usually the back side vent).

So much for RIpoles. I take it that you've also looked at the various W-, N-, U-, H- and S-DIpoles.

Good luck.

CD player, passive box, Crown SR1, OnkenW Ciare PW388 + JBL2392/2490H + McCauley 9620 on C9090 Megaton horn (treble). Yes, a 2" driver as a tweeter... it's OK, the 2490 is a 3" mids...
  Reply With Quote
Old 19th August 2012, 01:46 AM   #3
jacq. is offline jacq.  Canada
diyAudio Member
Join Date: May 2004
Location: Montreal, Canada
Make it easy on yourself, get a mini DSP and a 60w/ch to 150w/ch second hand stereo transistor amp and follow infos on LINKWITZLAB.COM for dipole subs. You will not regret it.

Last edited by jacq.; 19th August 2012 at 01:51 AM.
  Reply With Quote


Need help with ripoleHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ripole sub design? mpa Subwoofers 4 29th December 2012 01:19 PM
How do you model a Ripole sub? markusA Subwoofers 10 16th June 2011 02:58 AM
My Ripole Project zobsky Subwoofers 120 6th November 2009 03:46 PM
Ripole vs Dipole bvan Subwoofers 5 2nd February 2009 02:08 PM
Ripole or other application? bluejay Subwoofers 2 30th December 2008 11:17 PM

New To Site? Need Help?

All times are GMT. The time now is 04:54 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio