B&C 18tbx100 T-tqwt

[bjorno]

..corrections..

Hi,

Doodle :

b

 

[soundhead]

As large as necessary without screwing up the passband FR or phase, of course.

At first hand:I never sub-optimize speakers by chasing SPL or Power,actually in my world all other parameters involved comes first as being more important.

SPL and Power is simple: Just add more speakers...

b

Thanks bjorno

i would also like to draw up the measurement for the double driver cabinet. Some of your example please.

 

[soundhead]

Bjorno
What does these circled measurement represent.




Thanks

 

[CRESCENDO]

They appear to be the lengths of panels and distances between panels

 

[soundhead]

What does these circled measurement represent.


View attachment 281022



Bjorno can you tell me what are the circled measurements for is it 110/16 or 1 10/16

Thanks

 

[bjorno]

What does these circled measurement represent.


View attachment 281022



Bjorno can you tell me what are the circled measurements for is it 110/16 or 1 10/16

Thanks

Hi,soundhead,

Admit this is confusing. All numbers are in 1/16" notation ,i.e. 110/!6 is = decimal equivalent to 6.875" or 6.875 x 2.54= ~17.5 cm

No danger to round up your built numbers an 1/8" off or even 1/4" wont be noticeable affecting the final performance.

b

 

[soundhead]

Bjorno so the middle piece of wood that the speaker hole is cut out of is 37.25 inches long. Correct.
Time to chop up some plywood.
Thanks

 

[soundhead]

cabinet measurement

Bjorno take a look at this and let me know if everything is correct.

 

[bjorno]

..Bjorno take a look at this and let me know if everything is correct...

Hi,

Looks OK!

b

 

[NWCgrad]

Bjorno so the middle piece of wood that the speaker hole is cut out of is 37.25 inches long. Correct.
Time to chop up some plywood.
Thanks

Did you chop up some plywood? Photos? Listening impression?

Best
Steve