Dayton RSS390HF-4 Design Help - Page 2

Homeboydeluxe · 18th December 2011, 10:09 PM

Scroll the down the, they do four 1500mm tubes for 23.63, with free delivery, if you in England.

Etocynned · 18th December 2011, 10:29 PM

Have you priced Aeroports at your local car audio dealer?

It's 4" vent material with 2 flares with a radius of about 2" they work excellent for minimizing turbulence.

ThunderMonkey · 20th December 2011, 02:31 AM

The postal tubes do seem like the cheapest option, although I wish they sold them singally instead of in packs. I have searched around car audio websites and I can find 6"ports but they only offer them in lengths of 150mm so I will still need to extend them with something. I could settle for two 4" flared ports but since I will need two of them it might work out quite a bit more expensive.

Homeboydeluxe · 20th December 2011, 11:00 AM

Well in my experience, I ended up using spare tubes in different projects, I got six 4" tubes, and two 8" tubes, and two years later they are all used.

You can just use a large router "round over" bit to make your flares for each end of the port.

dirkwright · 22nd December 2011, 04:22 PM

$37 and change for cardboard tubes? My god!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Integrating Dayton RSS390HF-4 IB with Open Baffle Mains	sharpi31	Subwoofers	1	8th February 2011 06:53 PM
Dayton RSS390HF-4 15"?	Elbert	Subwoofers	32	3rd May 2009 02:57 AM
Dayton RSS390HF-4 Isobarik Vented	Petriej	Subwoofers	5	31st July 2007 04:44 AM
Dayton RSS390HF sub project question....	jjkozlow	Subwoofers	17	22nd June 2007 01:40 AM
Dayton RS 15" subs are available (RSS390H0-4, RSS390HF-4)	roger_lew	Subwoofers	2	2nd June 2006 05:29 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th December 2011, 10:09 PM	#11
Homeboydeluxe diyAudio Member Join Date: Feb 2010	Scroll the down the, they do four 1500mm tubes for 23.63, with free delivery, if you in England.

18th December 2011, 10:29 PM	#12
Etocynned diyAudio Member Join Date: Dec 2011	Have you priced Aeroports at your local car audio dealer? It's 4" vent material with 2 flares with a radius of about 2" they work excellent for minimizing turbulence.

20th December 2011, 02:31 AM	#13
ThunderMonkey diyAudio Member Join Date: Dec 2011	The postal tubes do seem like the cheapest option, although I wish they sold them singally instead of in packs. I have searched around car audio websites and I can find 6"ports but they only offer them in lengths of 150mm so I will still need to extend them with something. I could settle for two 4" flared ports but since I will need two of them it might work out quite a bit more expensive.

20th December 2011, 11:00 AM	#14
Homeboydeluxe diyAudio Member Join Date: Feb 2010	Well in my experience, I ended up using spare tubes in different projects, I got six 4" tubes, and two 8" tubes, and two years later they are all used. You can just use a large router "round over" bit to make your flares for each end of the port.

22nd December 2011, 04:22 PM	#15
dirkwright diyAudio Member Join Date: May 2011 Location: Virginia	$37 and change for cardboard tubes? My god!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)