Is There a smallish prosound tapped horn 35-80hz

[epa]

so you want a ~200ltr cab that does 35hz flat with the ande LB15-1 driver ,like djims sim from post 103?
something like 45 wide 60 deep 80 high?

 

[reminence]

so you want a ~200ltr cab that does 35hz flat with the ande LB15-1 driver ,like djims sim from post 103?
something like 45 wide 60 deep 80 high?

Pretty much yes, as long as its portable and carry-able, like the ss15 is (under 30kg)

If not I will continue with the plan for dedicated boxes for the studio/home and PA.

 

[FreakyShotGlass]

If you can I would highly reccomend the LB1560 instead of the LB15-1, I have found that in general it just sims better in TH's. This is as low as I could get a design with decent SPL and still <200L, I'm sure some of the guru's could improve on it and I'm sure that the folding scheme here isn't the best.

 

[epa]

i need to know the dept of the LB15-1
for modeling ,if your still intrested
btw did you want flat to 35 or f3 of 35?

 

[Djim]

Hi Eric,

Here is the Link for that driver.

 

[reminence]

Thanks epa and Djim this project is on hold for the foreseeable future as I am building the studio sub first. http://www.diyaudio.com/forums/subwoofers/203827-20-30hz-tapped-horn-studio-ande-drivers-6.html

As for the pro sound subs I don't think I will have such weight and size restrictions as I once had yet this is on hold anyway.

Thanks, Jaye

 

[epa]

tnx djim dept is 173 mm

so in the fridge for now.

i like this driver with the sim from djim in a ~200ltr cab.
but wil put this one on ice then 🙂