15" kicker l7 30hz box design help !! - Page 8

BP1Fanatic · 08:34 PM

Here you go. Simple build. No angles. 67.5" H X 17.5" W X 18.25" D. This Tapped Quarter Wave Pipe has a constant 8" x 16" diameter. The 15L7 has an 8 11/16 mounting depth. With 0.75" (19.05mm) stock, you have 1/16" left to clear the magnet.

justint · 1st February 2012, 04:05 AM

baron thats my lp640 roadster

justint · 1st February 2012, 04:07 AM

bp thanks .. do you feel this is the best box design for 30hz extension as loud as it can get if i only have a 17.5" width availability?

BP1Fanatic · 1st February 2012, 10:25 AM

You could do a front loaded horn, but it would be more complicated build. I have HR numbers, but no box illustrations for a FLH.

TheBaronGroog · 1st February 2012, 11:25 AM

Quote:

Originally Posted by justint

baron thats my lp640 roadster

Nice, looked like a Lambo-just didn't recognise it. One of my customers has one-got it a year early as he "really wanted it"-should have waited as he got the old nav and audio system!. They invited him over for private viewing/drive of the Aventador (before it even had a name) as they knew he had the new MacLaren on order and it was the last week he could cancel and switch to the Lambo! Would love to say "lucky you"-but know you must have worked damn hard for it

31st January 2012, 08:32 PM	#71
BP1Fanatic diyAudio Member Join Date: Jan 2009 Location: Columbus, Ohio	Here you go. Simple build. No angles. 67.5" H X 17.5" W X 18.25" D. This Tapped Quarter Wave Pipe has a constant 8" x 16" diameter. The 15L7 has an 8 11/16 mounting depth. With 0.75" (19.05mm) stock, you have 1/16" left to clear the magnet. Last edited by BP1Fanatic; 31st January 2012 at 08:34 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
kicker l7 help	Chaoticdopey	Subwoofers	5	10th December 2010 12:52 PM
building my 1st ported box,kicker L7	scampo77	Subwoofers	28	2nd January 2010 06:31 PM
kicker L7 rebuildable?	scampo77	Car Audio	1	16th June 2009 01:51 PM
Kicker L7	skooter	Car Audio	5	25th September 2008 11:36 PM
15" box design ideas??	warnsey	Multi-Way	4	19th June 2008 01:01 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st February 2012, 04:05 AM	#72
justint diyAudio Member Join Date: Jan 2010 Location: wisconsin	baron thats my lp640 roadster

1st February 2012, 04:07 AM	#73
justint diyAudio Member Join Date: Jan 2010 Location: wisconsin	bp thanks .. do you feel this is the best box design for 30hz extension as loud as it can get if i only have a 17.5" width availability?

1st February 2012, 10:25 AM	#74
BP1Fanatic diyAudio Member Join Date: Jan 2009 Location: Columbus, Ohio	You could do a front loaded horn, but it would be more complicated build. I have HR numbers, but no box illustrations for a FLH.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)